____________________________________________________________________________________
| Home / Skid Steer Loaders / Caterpillar Skid Steer Loaders / Cat 226B3 |
Caterpillar 226B3 Maintenance
The
Cat 226B3 skid steer loader is powered by 134.1 cu.in (2.2L) Caterpillar C2.2T
4-cycle 4-cylinder direct injection turbocharged diesel engine with a rated
power of 56 hp (42 kW) at 3000 rpm. The Caterpillar 226B3 is equipped with
1-speed hydrostatic transmission, radial-lift loader boom, 80HS continuous
roller chains, and 10x16.5 tires. The hydraulic system has a pump with fluid
flow rate of 16 gpm (61 lpm). The hydraulic pressure is 3335 psi (230 bar). The
skid steer loader has a rated operating capacity of 1500 lbs (680 kg) and
tipping load of 3000 lbs (1360 kg). The lift height is 112.4 inches (2855 mm) to
hinge pin, and dump height is 85.4 inches (2170 mm).
| Refill Capacities |
Engine Oil Capacity, gal (L) .................... 2.6 (10.0)
Engine Coolant Capacity, gal (L) .................... 2.6 (10.0)
Hydraulic Tank Fluid Capacity, gal (L) .................... 9.2 (35.0)
Hydraulic System Fluid Capacity, gal (L) .................... 14.5 (55.0)
Chain Case Oil Capacity, gal (L) .................... 1.6 (6.0)
| Recommended Oil and Fluid |
Engine Oil Type .................... Cat DEO-ULS, SAE 10W-30, 15W-40. API Service CE, CF-4, CG-4, CH-4
Engine Coolant Type .................... Caterpillar Diesel Engine Antifreeze/Coolant
Hydraulic Fluid Type .................... Cat HYDO Advanced, Cat DEO, SAE 15W-40, 5W-40
Chain Case Oil Type .................... Cat DEO-ULS, SAE 15W-40, 5W-40
| Service Intervals |
Lubricate Cylinder Pivot Points .................... Every 100 Hours
Check and Adjust Alternator/Fan Belt .................... Every 250 Hours
Clean Cab Air Filters .................... Every 250 Hours
Clean Primary Engine Air Filter .................... Every 250 Hours
Check and Adjust Drive Chain .................... Every 250 Hours
Change Engine Oil .................... Every 500 Hours
Replace Engine Oil Filter .................... Every 500 Hours
Replace Primary Fuel Filter .................... Every 500 Hours
Replace Final Fuel Filter .................... Every 500 Hours
Replace Primary Engine Air Filter .................... Every 500 Hours
Replace Secondary Engine Air Filter .................... Every 500 Hours
Replace Hydraulic Tank Breather .................... Every 500 Hours
Replace Cab Air Filters .................... Every 500 Hours
Check Chain Case Oil Level .................... Every 500 Hours
Change Chain Case Oil .................... Every 1000 Hours
Change Hydraulic Fluid .................... Every 1000 Hours
Replace Hydraulic Oil Filter .................... Every 1000 Hours
Replace Alternator/Fan Belt .................... Every 1000 Hours
Service And Refill Cooling System .................... Every 3000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number .................... 220-1523
Fuel Water Separator. Part Number .................... 156-1200
In-line Fuel Filter. Part Number .................... 1G-7206, 3I-1083
Primary Engine Air Filter. Part Number .................... 231-0167, 154-7108
Secondary Engine Air Filter. Part Number .................... 231-0168
Cab Air Filter. Part Number .................... 231-8130, 231-8132
Hydraulic Oil Filter. Part Number .................... 1G-8878
Hydraulic Tank Breather. Part Number .................... 207-9729
Alternator/Fan Belt. Part Number .................... 438-1597
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |