Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SV250 |
Case SV250 Specifications
The Case SV250 skid steer loader is powered by 195 cu.in (3.2L) FPT F5C E5454 vertical four-cylinder turbocharged diesel engine with a rated power of 76 hp (57 kW) at 2500 rpm. The Case SV250 is equipped with a vertical-lift loader boom, single-speed or two-speed hydrostatic transmission, ASA 100 drive chains, and 12.00x16.5 (Std) or 14.00x17.5 (Opt) tires. The hydraulic system has a pump with fluid flow rate of 22.5 gpm (85 lpm) or 34.6 gpm (131 lpm). The loader has a boom breakout force of 4800 lbs (2180 kg) and bucket breakout force of 7570 lbs (3440 kg). The rated operating capacity is 2500 lbs (1135 kg), and tipping load is 5000 lbs (2270 kg).
Engine Specs |
Engine Model ...................... FPT F5C E5454
Engine Type ...................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ...................... 4
Total Displacement, cu.in (L) ...................... 195.2 (3.2)
Cylinder Bore, in (mm) ...................... 3.90 (99.0)
Piston Stroke, in (mm) ...................... 4.09 (104.0)
Rated Engine Power, hp (kW) ...................... 76.0 (57.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 305 (225)
Torque Speed, rpm ...................... 1400
Idling Speed, rpm ...................... 1000-2700
Aspiration Type ...................... Turbocharged
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Mechanical
Air Cleaner Type ...................... Dry, dual element
Lubricating System ...................... Forced lubrication
Oil Filter Type ...................... Full flow
Cooling System ...................... Liquid-cooled
Emission Level ..................... Tier 3
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Engine Oil Capacity, qts (L) ...................... 10.0 (9.5)
Coolant Capacity, qts (L) ..................... 20.0 (19.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 120
Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 100 roller chain
Front Tire Size (Std) ..................... 12.00x16.5
Rear Tire Size (Std) ..................... 12.00x16.5
Front Tire Size (Opt) ..................... 14.00x17.5
Rear Tire Size (Opt) ..................... 14.00x17.5
Chaincase Capacity, qts (L) ..................... 29.5 (27.9)
Maximum Speed (Single), mph (km/h) ..................... 7.0 (11.3)
Maximum Speed (Two), mph (km/h) ..................... 10.5 (16.9)
Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 22.5 (85.0)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 34.6 (131.0)
System Pressure, Bar (psi) ..................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ..................... 6.0 (22.7)
Hydraulic System Capacity, gal (L) ..................... 11.7 (44.5)
Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 2500 (1135)
Tipping Load, lbs (kg) ..................... 5000 (2270)
Breakout force (Boom), lbs (kg) ..................... 4800 (2180)
Breakout force (Bucket), lbs (kg) ..................... 7570 (3440)
Loader Boom Type ................... Vertical-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 52 (1320)
Height (Operator Cab), in (mm) ..................... 78.8 (2000)
Height (Boom Raised), in (mm) ..................... 160.4 (4075)
Length (w/o Bucket), in (mm) ..................... 117.7 (2990)
Length (Bucket On Ground), in (mm) ..................... 141.9 (3605)
Width (w/o Bucket), in (mm) ..................... 56.9 (1445)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 130 (3300)
Dump Angle At Max Height, deg ..................... 54
Dump Height (Fully Raised), in (mm) ..................... 103.5 (2630)
Dump Reach At Max Height, in (mm) ..................... 29.3 (745)
Rollback Angle At Ground Level, deg ..................... 35
Rollback Angle At Max Height, deg ..................... 86
Departure Angle, deg ..................... 24
Bucket Width, in (mm) ..................... 72 (1830)
Ground Clearance, in (mm) ..................... 8.0 (203)
Turning Radius (Front w/Bucket), in (mm) ..................... 84.1 (2135)
Turning Radius (Front w/o Bucket), in (mm) ..................... 56.2 (1430)
Turning Radius (Rear), in (mm) ..................... 70.4 (1790)
Shipping Weight, lbs (kg) ..................... 7665 (3475)
Operating Weight, lbs (kg) ..................... 8000 (3630)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |