| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SR240 |
Case SR240 Specifications
The
Case SR240 skid steer loader driveline system components: FPT F5H FL463A
4-cylinder direct injection turbocharged diesel engine with a rated power of 68
hp (51 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic
system has a pump with a rated capacity of 24.2 gal/min (91.5 l/min) or 37.6
gal/min (142.5 l/min). The Case SR240 is equipped with a radial-lift loader
boom, ASA 100 drive chains, and 12.00x16.5 standard tires. The skid steer loader
has a rated operating capacity of 2400 lbs (1090 kg) and tipping load of 4800
lbs (2180 kg). The boom breakout force is 5530 lbs (2510 kg), and bucket
breakout force is 8680 lbs (3945 kg).
| Engine Specs |
Engine Model ..................... FPT F5H FL463A
Engine Type ..................... 4-Stroke direct injection turbocharged diesel
Number of Cylinders ..................... 4
Displacement, cu in (L) ..................... 207 (3.4)
Engine Bore, in (mm) ..................... 3.89 (99.0)
Engine Stroke, in (mm) ..................... 4.33 (110.0)
Aspiration Type ..................... Turbocharged
Rated Engine Power, hp (kW) ..................... 68.0 (51.0)
Rated Engine Speed, rpm ..................... 2500
Maximum Torque, Nm (ft-lb) ..................... 314 (232)
Torque Speed, rpm ..................... 1400
High Idle Speed, rpm ..................... 2500
Low Idle Speed, rpm ..................... 1100
Firing Order ..................... 1-3-4-2
Fuel System ..................... Common rail direct injection
Fuel Injection Pump ..................... Mechanical
Governor Type ..................... Mechanical
Lubricating System ..................... Forced lubrication
Oil Filter Type ..................... Full-flow cartridge
Cooling System ..................... Pressurized
Water Pump Type ..................... Centrifugal
Air Cleaner Type ..................... Dry element
Fuel Tank Capacity, gal (L) ..................... 19.5 (73.8)
Oil Capacity, qts (L) ..................... 8.9 (8.5)
Coolant Capacity, qts (L) ..................... 20.0 (19.0)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 120
| Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 100 roller chain
Front Tire Size (Std) ..................... 12.00x16.5
Rear Tire Size (Std) ..................... 12.00x16.5
Front Tire Size (Opt) ..................... 33x15.5x16.5
Rear Tire Size (Opt) ..................... 33x15.5x16.5
Chaincase Capacity, qts (L) ..................... 23.1 (22.0)
Maximum Speed (Single), mph (km/h) ..................... 7.0 (11.2)
Maximum Speed (Two), mph (km/h) ..................... 10.5 (16.9)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 24.2 (91.5)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 37.6 (142.5)
System Pressure, Bar (psi) ..................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ..................... 7.0 (26.5)
Hydraulic System Capacity, gal (L) ..................... 11.8 (44.5)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 2400 (1090)
Tipping Load, lbs (kg) ..................... 4800 (2180)
Breakout force (Boom), lbs (kg) ..................... 5530 (2510)
Breakout force (Bucket), lbs (kg) ..................... 8680 (3945)
Loader Boom Type ................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 52 (1320)
Height (Operator Cab), in (mm) ..................... 78.8 (2000)
Height (Boom Raised), in (mm) ..................... 156.3 (3970)
Length (w/o Bucket), in (mm) ..................... 117.4 (2980)
Length (Bucket On Ground), in (mm) ..................... 142.2 (3610)
Width (w/o Bucket), in (mm) ..................... 56.9 (1445)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 125.1 (3180)
Dump Angle At Max Height, deg ..................... 38
Dump Height (Fully Raised), in (mm) ..................... 100.9 (2560)
Dump Reach At Max Height, in (mm) ..................... 22.6 (575)
Rollback Angle At Ground Level, deg ..................... 31
Rollback Angle At Max Height, deg ..................... 100
Departure Angle, deg ..................... 24
Bucket Width, in (mm) ..................... 72 (1830)
Ground Clearance, in (mm) ..................... 8.0 (203)
Turning Radius (Front w/Bucket), in (mm) ..................... 83.5 (2120)
Turning Radius (Front w/o Bucket), in (mm) ..................... 55.1 (1400)
Turning Radius (Rear), in (mm) ..................... 70.4 (1790)
Shipping Weight, lbs (kg) ..................... 7065 (3200)
Operating Weight, lbs (kg) ..................... 7400 (3350)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |