____________________________________________________________________________________
| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SR210 |
Case SR210 Specifications
The
Case SR210 skid steer loader is powered by 207 cu.in (3.4L) FPT F5H FL463A
four-cylinder direct injection turbocharged diesel engine with a rated power of
68 hp (51 kW) at 2500 rpm. The Case SR210 is equipped with a radial-lift loader
boom, single-speed or two-speed hydrostatic transmission, ASA 100 drive chains,
and 12.00x16.5 standard tires. The hydraulic system has a pump with fluid flow
rate of 24.2 gpm (91.5 lpm) or 33.2 gpm (125.7 lpm). The skid steer loader has a
rated operating capacity of 2100 lbs (955 kg) and tipping load of 4200 lbs (1905
kg). The boom breakout force is 4570 lbs (2075 kg), and bucket breakout force is
7270 lbs (3305 kg).
| Engine Specs |
Engine Model ..................... FPT F5H FL463A
Engine Type ..................... 4-Stroke direct injection turbocharged diesel
Number of Cylinders ..................... 4
Displacement, cu in (L) ..................... 207 (3.4)
Engine Bore, in (mm) ..................... 3.89 (99.0)
Engine Stroke, in (mm) ..................... 4.33 (110.0)
Aspiration Type ..................... Turbocharged
Rated Engine Power, hp (kW) ..................... 68.0 (51.0)
Rated Engine Speed, rpm ..................... 2500
Maximum Torque, Nm (ft-lb) ..................... 314 (232)
Torque Speed, rpm ..................... 1400
High Idle Speed, rpm ..................... 2500
Low Idle Speed, rpm ..................... 1100
Firing Order ..................... 1-3-4-2
Fuel System ..................... Common rail direct injection
Fuel Injection Pump ..................... Mechanical
Governor Type ..................... Mechanical
Lubricating System ..................... Forced lubrication
Oil Filter Type ..................... Full-flow cartridge
Cooling System ..................... Pressurized
Water Pump Type ..................... Centrifugal
Air Cleaner Type ..................... Dry element
Fuel Tank Capacity, gal (L) ..................... 19.5 (73.8)
Oil Capacity, qts (L) ..................... 10.0 (9.4)
Coolant Capacity, qts (L) ..................... 20.0 (19.0)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 120
| Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 100 roller chain
Front Tire Size (Std) ..................... 12.00x16.5
Rear Tire Size (Std) ..................... 12.00x16.5
Front Tire Size (Opt) ..................... 33x12.0x20
Rear Tire Size (Opt) ..................... 33x12.0x20
Chaincase Capacity, qts (L) ..................... 27.3 (26.0)
Maximum Speed (Single), mph (km/h) ..................... 7.1 (11.4)
Maximum Speed (Two), mph (km/h) ..................... 10.5 (16.9)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 24.2 (91.5)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 33.2 (125.7)
System Pressure, Bar (psi) ..................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ..................... 7.0 (26.5)
Hydraulic System Capacity, gal (L) ..................... 8.5 (32.2)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 2100 (955)
Tipping Load, lbs (kg) ..................... 4200 (1905)
Breakout force (Boom), lbs (kg) ..................... 4570 (2075)
Breakout force (Bucket), lbs (kg) ..................... 7270 (3305)
Loader Boom Type ................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 44.4 (1125)
Height (Operator Cab), in (mm) ..................... 78.7 (2000)
Height (Boom Raised), in (mm) ..................... 154.3 (3920)
Length (w/o Bucket), in (mm) ..................... 105.1 (2670)
Length (Bucket On Ground), in (mm) ..................... 129.6 (3290)
Width (w/o Bucket), in (mm) ..................... 56.9 (1445)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 123 (3125)
Dump Angle At Max Height, deg ..................... 39
Dump Height (Fully Raised), in (mm) ..................... 98.2 (2495)
Dump Reach At Max Height, in (mm) ..................... 23.4 (595)
Rollback Angle At Ground Level, deg ..................... 31
Rollback Angle At Max Height, deg ..................... 99
Departure Angle, deg ..................... 25
Bucket Width, in (mm) ..................... 72 (1830)
Ground Clearance, in (mm) ..................... 8.0 (203)
Turning Radius (Front w/Bucket), in (mm) ..................... 79.9 (2030)
Turning Radius (Front w/o Bucket), in (mm) ..................... 50.7 (1285)
Turning Radius (Rear), in (mm) ..................... 62.9 (1600)
Shipping Weight, lbs (kg) ..................... 6670 (3025)
Operating Weight, lbs (kg) ..................... 6970 (3160)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |