Home / Skid Steer Loaders / Case Skid Steer Loaders / Case SR175B

Case SR175B Specifications

The Case SR175B skid steer loader is powered by 135.2 cu.in (2.2L) Perkins 404F-E22TA 4-cylinder turbocharged intercooled diesel engine with a rated power of 64 hp (47.6 kW) at 2800 rpm. The Case SR175B is equipped with a radial-lift loader boom, one-speed or two-speed hydro transmission, ASA 80 drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 20.6 gpm (78 lpm) or 30.7 gpm (116.2 lpm). The skid steer loader has a rated operating capacity of 1750 lbs (790 kg) and tipping load of 3500 lbs (1590 kg). The lift height is 122 inches (3100 mm) to hinge pin, and dump height is 97.2 inches (2470 mm).

Engine Specs

Engine Model ..................... Perkins 404F-E22TA
Engine Type ..................... 4-cycle vertical in-line liquid-cooled diesel
Number of Cylinders ..................... 4
Total Displacement, cu.in (L) ..................... 135.2 (2.22)
Cylinder Bore, in (mm) ..................... 3.31 (84.0)
Piston Stroke, in (mm) ..................... 3.94 (100.0)
Rated Engine Power, hp (kW) ..................... 64.0 (47.6)
Rated Engine Speed, rpm ..................... 2800
Maximum Torque, Nm (lb-ft) ..................... 208 (153)
Torque Speed, rpm ..................... 1800
Idling Speed, rpm ..................... 1150-2850
Aspiration Type ..................... Turbocharged and intercooled
Compression Ratio ..................... 18:1
Firing Order ..................... 1-3-4-2
Fuel System ..................... Common rail direct injection
Air Cleaner Type ..................... Dry, dual element
Lubricating System ..................... Pressure feed with trochoid pump
Oil Filter Type ..................... Full flow
Cooling System ..................... Liquid-cooled with radiator
Water Pump Type ..................... Centrifugal
Emission Level ..................... Tier 4 Final
Fuel Tank Capacity, gal (L) ..................... 19.5 (73.8)
Engine Oil Capacity, qts (L) ..................... 7.5 (7.1)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 120

Drive Train

Drive System Type ..................... Hydrostatic transmission
Number of Gears (Std) ..................... Single
Number of Gears (Opt) ..................... Two
Chain Drive Type ..................... ASA 80 roller chain
Front Tire Size (Std) ..................... 10.00x16.5
Rear Tire Size (Std) ..................... 10.00x16.5
Front Tire Size (Opt) ..................... 12.00x16.5
Rear Tire Size (Opt) ..................... 12.00x16.5
Chaincase Capacity, qts (L) ..................... 7.8 (7.4)
Maximum Speed (Single), mph (km/h) ..................... 7.4 (11.9)
Maximum Speed (Two), mph (km/h) ..................... 10.8 (17.4)

Hydraulic System

Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity (Standard), gpm (Lpm) ..................... 20.6 (78.0)
Pump Capacity (High-Flow), gpm (Lpm) ..................... 30.7 (116.2)
System Pressure, Bar (psi) ..................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ..................... 5.0 (18.9)
Hydraulic System Capacity, gal (L) ..................... 8.5 (32.2)

Loader Performance

Rated Operating Capacity, lbs (kg) ..................... 1750 (790)
Tipping Load, lbs (kg) ..................... 3500 (1590)
Breakout force (Boom), lbs (kg) ..................... 3810 (1730)
Breakout force (Bucket), lbs (kg) ..................... 7270 (3305)
Loader Boom Type ................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ..................... 44.4 (1125)
Height (Operator Cab), in (mm) ..................... 77.7 (1975)
Height (Boom Raised), in (mm) ..................... 153.4 (3895)
Length (w/o Bucket), in (mm) ..................... 105.7 (2685)
Length (Bucket On Ground), in (mm) ..................... 130.1 (3305)
Width (w/o Bucket), in (mm) ..................... 53.9 (1370)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 122 (3100)
Dump Angle At Max Height, deg ..................... 39
Dump Height (Fully Raised), in (mm) ..................... 97.2 (2470)
Dump Reach At Max Height, in (mm) ..................... 24.4 (620)
Rollback Angle At Ground Level, deg ..................... 32
Rollback Angle At Max Height, deg ..................... 98
Departure Angle, deg ..................... 23
Bucket Width, in (mm) ..................... 66 (1675)
Ground Clearance, in (mm) ..................... 7.0 (177)
Turning Radius (Front w/Bucket), in (mm) ..................... 78.4 (1990)
Turning Radius (Front w/o Bucket), in (mm) ..................... 50.7 (1285)
Turning Radius (Rear), in (mm) ..................... 62.9 (1600)
Shipping Weight, lbs (kg) ..................... 5970 (2705)
Operating Weight, lbs (kg) ..................... 6270 (2840)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS