Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 440

Case 440 Maintenance

The Case 440 Series 3 skid steer loader is powered by 274 cu.in (4.5L) Case 445T/M3 4-cylinder direct injection turbocharged diesel engine with a rated power of 90 hp (67 kW) at 2300 rpm. The Case 440 is equipped with a two-speed hydro transmission, axial piston drive pumps, 100HV continuous roller chains, and 12x16.5 or 33-15.5x16.5 tires. The hydraulic system has a pump with fluid flow rate of 21.9 gpm (83 lpm). The hydraulic pressure is 3050 psi (210 bar). The skid steer loader has a rated operating capacity of 2200 lbs (998 kg) and tipping load of 4400 lbs (2724 kg). The lift height is 121.6" (3090 mm) to hinge pin, and dump height is 96" (2440 mm).

Refill Capacities

Engine Oil Capacity, gal (L) .................. 3.2 (12.0)
Engine Coolant Capacity, gal (L) .................. 3.0 (11.4)
Hydraulic Reservoir Capacity, gal (L) .................. 7.1 (27.0)
Hydraulic System Capacity, gal (L) .................. 13.3 (50.3)
Chain Case Oil Capacity, qts (L) .................. 8.0 (7.6)
Fuel Tank Capacity, gal (L) .................. 22.0 (83.3)

Recommended Oil and Fluid

Engine Oil Type .................. SAE 15W-40. API Service Category CH-4
Engine Coolant Type .................. Extended-Life Coolant/Antifreeze
Hydraulic Fluid Type .................. SAE 10W-30
Chain Case Oil Type .................. SAE 10W-30

Service Intervals

Lubricate Cylinder Pivot Points .................. Every 50 Hours
Check Hydraulic Fluid Level .................. Every 50 Hours
Check Chain Case Oil Level .................. Every 50 Hours
Check Battery Connections .................. Every 100 Hours
Check Alternator/Fan Belt Tension .................. Every 100 Hours
Check Drive Chain Tension .................. Every 250 Hours
Clean Primary Air Filter .................. Every 250 Hours
Change Engine Oil .................. Every 500 Hours
Replace Engine Oil Filter .................. Every 500 Hours
Replace Hydraulic Filter Element .................. Every 500 Hours
Replace Fuel Filter Element .................. Every 500 Hours
Replace Primary Air Filter .................. Every 500 Hours
Replace Secondary Air Filter .................. Every 500 Hours
Change Chain Case Oil .................. Every 1000 Hours
Change Hydraulic Fluid .................. Every 1000 Hours
Change Engine Coolant .................. Every 2000 Hours

Replacement Parts

Engine Oil Filter. Part Number .................. 87803202, 2856715
Engine Fuel Filter. Part Number .................. 87803194, 84565884
In-Line Fuel Filter. Part Number .................. 87548612
Primary Engine Air Filter. Part Number .................. 222421A1, 84217229
Secondary Engine Air Filter. Part Number .................. 222422A1, 87682999
Hydraulic Oil Filter. Part Number .................. 87430661, 87010593 (Element)
Alternator Belt. Part Number .................. SBA080109061

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS