____________________________________________________________________________________
| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 410 |
Case 410 Maintenance
The
Case 410 skid steer loader is powered by 134 cu.in (2.2L) Case 422/M2
4-cylinder indirect injection liquid-cooled diesel engine with a rated power of
51 hp (38 kW) at 2500 rpm. The Case 410 is equipped with a hydrostatic
transmission, axial piston drive pumps, 80HS continuous roller chain, and
10x16.5 standard tires. The open center hydraulic system has a gear pump with
fluid flow rate of 18 gpm (68.3 lpm). The hydraulic pressure is 3000 psi (207
bar). The skid steer loader has a rated operating capacity of 1500 lbs (680 kg)
and tipping load of 3000 lbs (1360 kg). The lift height is 114.6 inches (2910
mm) to hinge pin, and dump height is 89.4 inches (2270 mm).
| Refill Capacities |
Engine Oil Capacity, gal (L) .................. 2.3 (8.7)
Engine Coolant Capacity, gal (L) .................. 4.5 (17.0)
Hydraulic Reservoir Capacity, gal (L) .................. 7.1 (27.0)
Hydraulic System Capacity, gal (L) .................. 13.3 (50.2)
Chain Case Oil Capacity, qts (L) .................. 6.0 (5.7)
Fuel Tank Capacity, gal (L) .................. 22.0 (83.3)
| Recommended Oil and Fluid |
Engine Oil Type .................. SAE 15W-40. API Service Category CH-4
Engine Coolant Type .................. Extended-Life Coolant/Antifreeze
Hydraulic Fluid Type .................. SAE 10W-30
Chain Case Oil Type .................. SAE 10W-30
| Service Intervals |
Lubricate Cylinder Pivot Points .................. Every 50 Hours
Check Hydraulic Fluid Level .................. Every 50 Hours
Check Chain Case Oil Level .................. Every 50 Hours
Check Battery Connections .................. Every 100 Hours
Check Alternator/Fan Belt Tension .................. Every 100 Hours
Check Drive Chain Tension .................. Every 250 Hours
Clean Primary Air Filter .................. Every 250 Hours
Change Engine Oil .................. Every 250 Hours
Replace Engine Oil Filter .................. Every 250 Hours
Replace Hydraulic Filter Element .................. Every 500 Hours
Replace Fuel Filter Element .................. Every 500 Hours
Replace Primary Air Filter .................. Every 500 Hours
Replace Secondary Air Filter .................. Every 500 Hours
Change Chain Case Oil .................. Every 1000 Hours
Change Hydraulic Fluid .................. Every 1000 Hours
Change Engine Coolant .................. Every 2000 Hours
| Replacement Parts |
Engine Oil Filter. Part Number .................. 84475542
Engine Fuel Filter. Part Number .................. 87039679
In-Line Fuel Filter. Part Number .................. 9611973
Primary Engine Air Filter. Part Number .................. 222425A1, 86982522
Secondary Engine Air Filter. Part Number .................. 222429A1, 86982523
Hydraulic Oil Filter. Part Number .................. 87430661, 87010593 (Element)
Alternator Belt. Part Number .................. SBA080109061
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |