____________________________________________________________________________________
Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1845B |
Case 1845B Specifications
The
Case 1845B skid steer loader is powered by Case 188D four-cylinder naturally
aspirated liquid-cooled diesel engine with a rated power of 49 hp (36.5 kW) at
2200 rpm. The Case 1845B is equipped with a radial-lift loader boom, one-speed
hydrostatic transmission, 80HT drive chains, and 12.00x16.5 or 7.50x16 tires.
The hydraulic system has a pump with fluid flow rate of 16.8 gpm (63.6 lpm). The
hydraulic pressure is 2300 psi (159 bar). The skid steer loader has a rated
operating capacity of 1700 lbs (770 kg) and tipping load of 3120 lbs (1415 kg).
The lift height is 110.5 inches (2805 mm) to hinge pin, and dump height is 84
inches (2135 mm).
Engine Specs |
Engine Model ..................... Case 188D
Engine Type ..................... 4-Stroke four-cylinder liquid-cooled diesel
Number of Cylinders ..................... 4
Displacement, cu in (L) ..................... 188 (3.08)
Engine Bore, in (mm) ..................... 3.81 (97.0)
Engine Stroke, in (mm) ..................... 4.12 (105.0)
Aspiration Type ..................... Naturally aspirated
Rated Engine Power, hp (kW) ..................... 49.0 (36.5)
Rated Engine Speed, rpm ..................... 2200
Maximum Torque, Nm (ft-lb) ..................... 180 (133)
Torque Speed, rpm ..................... 1250
Compression Ratio ..................... 17.5:1
Firing Order ..................... 1-3-4-2
Fuel System Type ..................... Injection pump
Air Cleaner Type ..................... Dry element
Fuel Tank Capacity, gal (L) ..................... 19.5 (73.8)
Oil Capacity, qts (L) ..................... 5.0 (4.7)
Coolant Capacity, qts (L) ..................... 8.1 (7.6)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 95
Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... 80HT roller chain
Front Tire Size (Std) ..................... 12.00x16.5
Rear Tire Size (Std) ..................... 12.00x16.5
Front Tire Size (Opt) ..................... 7.50x16
Rear Tire Size (Opt) ..................... 7.50x16
Maximum Speed, mph (km/h) ..................... 6.2 (10.0)
Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 16.8 (63.6)
System Pressure, Bar (psi) ..................... 159 (2300)
Hydraulic System Capacity, gal (L) ..................... 15.5 (58.7)
Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 1700 (770)
Tipping Load, lbs (kg) ..................... 3120 (1415)
Breakout force (Bucket), lbs (kg) ..................... 4880 (2215)
Breakout force (Boom), lbs (kg) ..................... 3250 (1475)
Loader Boom Type ................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 37 (940)
Height (Operator Cab), in (mm) ..................... 77 (1955)
Height (Boom Raised), in (mm) ..................... 145.5 (3695)
Length (w/o Bucket), in (mm) ..................... 96.5 (2450)
Length (Bucket On Ground), in (mm) ..................... 125 (3175)
Width (w/o Bucket), in (mm) ..................... 48.9 (1240)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 110.5 (2805)
Dump Angle At Max Height, deg ..................... 43
Dump Height (Fully Raised), in (mm) ..................... 84 (2135)
Dump Reach At Max Height, in (mm) ..................... 22 (560)
Rollback Angle At Ground Level, deg ..................... 29
Rollback Angle At Max Height, deg ..................... 100
Bucket Width, in (mm) ..................... 54 (1370)
Ground Clearance, in (mm) ..................... 6.5 (165)
Turning Radius (Front w/Bucket), in (mm) ..................... 73 (1855)
Turning Radius (Front w/o Bucket), in (mm) ..................... 44 (1115)
Turning Radius (Rear), in (mm) ..................... 59 (1500)
Shipping Weight, lbs (kg) ..................... 5470 (2480)
Operating Weight, lbs (kg) ..................... 5965 (2705)
____________________________________________________________________________________
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |