Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1835C |
Case 1835C Specifications
The Case 1835C skid steer loader driveline system components: a 123 cu.in (2 L) Wisconsin TM20 three-cylinder OHV water-cooled gasoline engine with a rated power of 48 hp (35.6 kW), and 1-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 16.4 gal/min (62.2 l/min). The system pressure is 2300 psi (159 bar). The Case 1835C is equipped with a radial-lift loader boom, 80HT drive chains, and 10.00x16.5 standard tires. The skid steer loader has a max lift height of 110.5" (2805 mm) to hinge pin and dump height of 84" (2135 mm). The rated operating capacity is 1200 lbs (545 kg), and tipping load is 2400 lbs (1090 kg).
Engine Specs |
Engine Model ..................... Wisconsin TM20
Engine Type ..................... 4-stroke 3-cylinder OHV water-cooled gasoline
Number of Cylinders ..................... Three
Displacement, cu in (L) ..................... 123 (2.02)
Cylinder Bore, in (mm) ..................... 3.58 (91.0)
Piston Stroke, in (mm) ..................... 4.06 (103.2)
Rated Engine Power, hp (kW) ..................... 48.0 (35.6)
Rated Engine Speed, rpm ..................... 2700
Compression Ratio ..................... 8.2:1
Firing Order ..................... 1-3-2
Fuel System ..................... Carburetor
Governor Type ..................... Mechanical
Lubricating System ..................... Full pressure
Cooling System ..................... Water-cooled
Air Cleaner Type ..................... Dry element
Spark Plug Gap, in (mm) ..................... 0.032 (0.8)
Intake Valve Clearance, in (mm) ..................... 0.014 (0.36)
Exhaust Valve Clearance, in (mm) ..................... 0.018 (0.46)
Fuel Tank Capacity, gal (L) ..................... 19.5 (73.9)
Oil Capacity, qts (L) ..................... 6.0 (5.7)
Coolant Capacity, qts (L) ..................... 17.9 (17.0)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 65
Drive Train |
Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... 80HT roller chain
Front Tire Size (Std) ..................... 10.00x16.5
Rear Tire Size (Std) ..................... 10.00x16.5
Front Tire Size (Opt) ..................... 7.50x15
Rear Tire Size (Opt) ..................... 7.50x15
Chaincase Capacity, qts (L) ..................... 6.0 (5.7)
Maximum Speed, mph (km/h) ..................... 5.9 (9.5)
Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 16.4 (62.2)
System Pressure, Bar (psi) ..................... 159 (2300)
Hydraulic System Capacity, gal (L) ..................... 10.5 (39.8)
Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 1200 (545)
Tipping Load, lbs (kg) ..................... 2400 (1090)
Breakout force (Bucket), lbs (kg) ..................... 3065 (1395)
Breakout force (Boom), lbs (kg) ..................... 2775 (1260)
Loader Boom Type ................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 37 (940)
Height (Operator Cab), in (mm) ..................... 77 (1955)
Height (Boom Raised), in (mm) ..................... 145.5 (3695)
Length (w/o Bucket), in (mm) ..................... 96.5 (2450)
Length (Bucket On Ground), in (mm) ..................... 125 (3175)
Width (w/o Bucket), in (mm) ..................... 48.9 (1240)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 110.5 (2805)
Dump Angle At Max Height, deg ..................... 43
Dump Height (Fully Raised), in (mm) ..................... 84 (2135)
Dump Reach At Max Height, in (mm) ..................... 22 (560)
Rollback Angle At Ground Level, deg ..................... 29
Rollback Angle At Max Height, deg ..................... 100
Bucket Width, in (mm) ..................... 54 (1370)
Ground Clearance, in (mm) ..................... 6.5 (165)
Turning Radius (Front w/Bucket), in (mm) ..................... 73 (1855)
Turning Radius (Front w/o Bucket), in (mm) ..................... 44 (1115)
Turning Radius (Rear), in (mm) ..................... 59 (1500)
Shipping Weight, lbs (kg) ..................... 4500 (2045)
Operating Weight, lbs (kg) ..................... 4950 (2250)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |