Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1825B

Case 1825B Specifications

The Case 1825B skid steer loader is powered by 91.4 cu.in (1.5L) Kubota V1505 vertical four-cylinder indirect injection liquid-cooled diesel engine with a rated power of 27 hp (20.1 kW) at 2400 rpm. The Case 1825B is equipped with a 1-speed hydrostatic transmission, radial-lift loader boom, 60HT drive chain, and 5.70x15 standard tires. The hydraulic system has a pump with fluid flow rate of 9.6 gpm (36.3 lpm). The hydraulic pressure is 2300 psi (159 bar). The skid steer loader has a rated operating capacity of 885 lbs (400 kg) and tipping load of 1770 lbs (800 kg). The boom breakout force is 1730 lbs (785 kg), and bucket breakout force is 1795 lbs (815 kg).

Engine Specs

Engine Model ..................... Kubota V1505
Engine Type ..................... 4-stroke vertical water-cooled diesel
Number of Cylinders ..................... 4
Displacement, cu in (L) ..................... 91.4 (1.49)
Cylinder Bore, in (mm) ..................... 3.07 (78.0)
Piston Stroke, in (mm) ..................... 3.09 (78.4)
Rated Engine Power, hp (kW) ..................... 27.0 (20.1)
Rated Engine Speed, rpm ..................... 2400
Maximum Torque, Nm (ft-lb) ..................... 91 (67.1)
Torque Speed, rpm ..................... 2100
Aspiration Type ..................... Naturally aspirated
Compression Ratio ..................... 22.5:1
Firing Order ..................... 1-3-4-2
Fuel System ..................... Indirect injection
Governor Type ..................... Mechanical
Lubricating System ..................... Forced lubrication
Cooling System ..................... Liquid-cooled
Air Cleaner Type ..................... Dry element
Starter Type ..................... Electric
Fuel Tank Capacity, gal (L) ..................... 8.5 (32.2)
Oil Capacity, qts (L) ..................... 6.7 (6.3)
Coolant Capacity, qts (L) ..................... 7.0 (6.7)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 30

Drive Train

Drive System Type ..................... Hydrostatic transmission
Number of Gears ..................... Single
Chain Drive Type ..................... 60HT roller chain
Front Tire Size (Std) ..................... 5.70x15
Rear Tire Size (Std) ..................... 5.70x15
Front Tire Size (Opt) ..................... 27x8.50x15
Rear Tire Size (Opt) ..................... 27x8.50x15
Chaincase Capacity, qts (L) ..................... 3.0 (2.9)
Maximum Speed, mph (km/h) ..................... 5.7 (9.2)

Hydraulic System

Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 9.6 (36.3)
System Pressure, Bar (psi) ..................... 159 (2300)
Hydraulic Reservoir Capacity, gal (L) ..................... 5.8 (21.8)
Hydraulic System Capacity, gal (L) ..................... 7.5 (28.4)

Loader Performance

Rated Operating Capacity, lbs (kg) ..................... 885 (400)
Tipping Load, lbs (kg) ..................... 1770 (800)
Breakout force (Bucket), lbs (kg) ..................... 1795 (815)
Breakout force (Boom), lbs (kg) ..................... 1730 (785)
Loader Boom Type ................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ..................... 33.5 (845)
Height (Operator Cab), in (mm) ..................... 70.1 (1780)
Height (Boom Raised), in (mm) ..................... 126.9 (3225)
Length (w/o Bucket), in (mm) ..................... 84.8 (2155)
Length (Bucket On Ground), in (mm) ..................... 109 (2770)
Width (w/o Bucket), in (mm) ..................... 33.4 (850)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 98.2 (2495)
Dump Angle At Max Height, deg ..................... 40
Dump Height (Fully Raised), in (mm) ..................... 76 (1930)
Dump Reach At Max Height, in (mm) ..................... 27.6 (700)
Rollback Angle At Ground Level, deg ..................... 27
Rollback Angle At Max Height, deg ..................... 98
Departure Angle, deg ..................... 31
Bucket Width, in (mm) ..................... 44 (1120)
Ground Clearance, in (mm) ..................... 6.8 (173)
Turning Radius (Front w/Bucket), in (mm) ..................... 62.8 (1595)
Turning Radius (Front w/o Bucket), in (mm) ..................... 35.8 (910)
Turning Radius (Rear), in (mm) ..................... 52.2 (1325)
Shipping Weight, lbs (kg) ..................... 2850 (1295)
Operating Weight, lbs (kg) ..................... 3110 (1410)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS