| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1740 |
Case 1740 Specifications
The
Case 1740 skid steer loader driveline system components: a 188 cu.in (3.1L) Case
G-188D 4-cylinder naturally aspirated liquid-cooled diesel engine with a rated
power of 40 hp (29.6 kW), and variable speed sheave transmission. The hydraulic
system has a pump with a rated capacity of 18 gal/min (68.2 l/min). The system
pressure is 2600 psi (180 bar). The Case 1740 is equipped with a
radial-lift boom, 80H drive chains, and 7.00x15 standard tires. The skid
steer loader has a maximum lift height of 115.5" (2935 mm) to hinge pin and dump
height of 86.5" (2195 mm). The rated operating capacity is 1700 lbs (770 kg),
and tipping load is 2080 lbs (945 kg).
| Engine Specs |
Engine Model ..................... Case G-188D
Engine Type ..................... 4-stroke 4-cylinder liquid-cooled diesel
Number of Cylinders ..................... Four
Displacement, cu in (L) ..................... 188 (3.08)
Cylinder Bore, in (mm) ..................... 3.82 (97.0)
Piston Stroke, in (mm) ..................... 4.13 (105.0)
Rated Engine Power, hp (kW) ..................... 40.0 (29.6)
Rated Engine Speed, rpm ..................... 2000
Maximum Torque, Nm (ft-lb) ..................... 160 (116)
Torque Speed, rpm ..................... 1650
Compression Ratio ..................... 17.5:1
Aspiration Type ..................... Naturally aspirated
Firing Order ..................... 1-3-4-2
Fuel System ..................... Injection pump
Governor Type ..................... Mechanical
Lubricating System ..................... Positive pressure
Cooling System ..................... Pressurized
Air Cleaner Type ..................... Dry element
Fuel Tank Capacity, gal (L) ..................... 17.0 (64.4)
Oil Capacity, qts (L) ..................... 5.0 (4.7)
Coolant Capacity, qts (L) ..................... 11.0 (10.4)
Electrical System Rating, Volts ..................... 12
Charging System ..................... Alternator
Alternator Rating, Amps ..................... 95
| Drive Train |
Drive System Type ..................... 4-wheel drive, variable speed sheave
Clutch Type ..................... 4 single discs
Chain Drive Type ..................... 80H roller chain
Front Tire Size (Std) ..................... 7.00x15
Rear Tire Size (Std) ..................... 7.00x15
Front Tire Size (Opt) ..................... 10.00x16.5
Rear Tire Size (Opt) ..................... 10.00x16.5
Maximum Speed, mph (km/h) ..................... 5.0 (8.0)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 18.0 (68.2)
System Pressure, Bar (psi) ..................... 180 (2600)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 1700 (770)
Tipping Load, lbs (kg) ..................... 2080 (945)
Breakout force (Bucket), lbs (kg) ..................... 1660 (753)
Loader Boom Type ................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 35 (890)
Height (Operator Cab), in (mm) ..................... 84.5 (2145)
Height (Boom Raised), in (mm) ..................... 135 (3430)
Length (w/o Bucket), in (mm) ..................... 90.5 (2300)
Length (Bucket On Ground), in (mm) ..................... 120 (3050)
Width (w/o Bucket), in (mm) ..................... 51.5 (1285)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 115.5 (2935)
Dump Angle At Max Height, deg ..................... 50
Dump Height (Fully Raised), in (mm) ..................... 86.5 (2195)
Dump Reach At Max Height, in (mm) ..................... 25.8 (655)
Rollback Angle At Ground Level, deg ..................... 18
Grading Angle (Maximum), deg ..................... 113
Bucket Width, in (mm) ..................... 60 (1525)
Ground Clearance, in (mm) ..................... 7.0 (177)
Turning Radius (Front w/Bucket), in (mm) ..................... 75 (1905)
Turning Radius (Front w/o Bucket), in (mm) ..................... 46 (1170)
Turning Radius (Rear), in (mm) ..................... 52 (1320)
Shipping Weight, lbs (kg) ..................... 5100 (2320)
Operating Weight, lbs (kg) ..................... 5510 (2500)
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |