____________________________________________________________________________________
| Home / Skid Steer Loaders / Case Skid Steer Loaders / Case 1530B |
Case 1530B Specifications
The
Case 1530 Series B skid steer loader driveline system components: a 107.7 cu.in
(1.7L) Wisconsin VH4D 4-cylinder air-cooled gasoline engine with a rated power
of 30 hp (22.2 kW), and variable speed sheave transmission. The hydraulic system
has a pump with a rated capacity of 10.8 gal/min (40.9 l/min). The system relief
pressure is 2300 psi (159 bar). The Case 1530B is equipped with a radial-lift
boom, 80H drive chains, and 7.00x15 standard tires. The skid steer loader has a
max lift height of 114.5" (2910 mm) to hinge pin and overall length of 110"
(2795 mm). The rated operating capacity is 3000 lbs (1362 kg), and tipping load
is 6000 lbs (2724 kg).
| Engine Specs |
Engine Model ...................... Wisconsin VH4D
Engine Type ...................... 4-cycle 4-cylinder air-cooled gasoline engine
Number of Cylinders ...................... Four
Total Displacement, cu.in (L) ...................... 107.7 (1.76)
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 30.0 (22.2)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 106.5 (79)
Torque Speed, rpm ...................... 1700
Firing Order ...................... 1-3-4-2
Fuel System ...................... Carburetor
Lubricating System ...................... Oil spray
Oil Filter Type ...................... Full flow replaceable element
Air Cleaner Type ...................... Dry element
Cooling System ...................... Air-cooled
Ignition System ...................... Distributor
Spark Plug Gap, in (mm) ...................... 0.018-0.022 (0.46-0.56)
Breaker Point Gap, in (mm) ...................... 0.03 (0.76)
Fuel Tank Capacity, gal (L) ...................... 12.0 (45.5)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 35
| Drive Train |
Drive System Type ..................... 4-wheel drive, variable speed sheave
Clutch Type ..................... 4 single discs
Chain Drive Type ..................... 80H roller chain
Front Tire Size (Std) ..................... 7.00x15
Rear Tire Size (Std) ..................... 7.00x15
Front Tire Size (Opt) ..................... 10.00x16.5
Rear Tire Size (Opt) ..................... 10.00x16.5
Maximum Speed, mph (km/h) ..................... 5.0 (8.0)
| Hydraulic System |
Hydraulic System Type ..................... Open center
Hydraulic Pump Type ..................... Gear
Pump Capacity, gpm (Lpm) ..................... 10.8 (40.9)
System Pressure, Bar (psi) ..................... 159 (2300)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ..................... 1500 (682)
Tipping Load, lbs (kg) ..................... 2750 (1250)
Loader Boom Type ................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ..................... 35 (890)
Height (Operator Cab), in (mm) ..................... 84.5 (2145)
Length (w/o Bucket), in (mm) ..................... 80.5 (2045)
Length (Bucket On Ground), in (mm) ..................... 110 (2795)
Width (w/o Bucket), in (mm) ..................... 59.5 (1510)
Height to Hinge Pin (Fully Raised), in (mm) ..................... 114.5 (2910)
Bucket Width (Std), in (mm) ..................... 60 (1525)
Bucket Width (Opt), in (mm) ..................... 66 (1675)
Ground Clearance, in (mm) ..................... 7.0 (177)
Shipping Weight, lbs (kg) ..................... 3885 (1750)
Operating Weight, lbs (kg) ..................... 4250 (1930)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |