____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 883 G-Series |
Bobcat 883 G-Series Specifications
The
Bobcat 883 G-Series skid steer loader driveline system components: a 178 cu.in
(2.9L) Deutz BF4M1011F 4-cylinder turbocharged diesel engine with a rated power
of 73.5 hp (54.8 kW), and 1-speed or 2-speed hydro transmission. The hydraulic
system has a pump with a rated capacity of 20.7 gal/min (78.4 l/min) or 30.7
gal/min (116.3 l/min). The Bobcat 883 is equipped with a vertical-lift loader
boom, 100HS drive chains, and 33x15.5x16.5 standard tires. The skid steer loader
has a max lift height of 124.3" (3155 mm) to hinge pin and dump height of
99" (2515 mm). The rated operating capacity is 2750 lbs (1275 kg), and tipping
load is 5500 lbs (2550 kg).
| Engine Specs |
Engine Model ...................... Deutz BF4M1011F
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 178 (2.92)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 73.5 (54.8)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 222 (164)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1125-2770
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Fuel Tank Capacity, gal (L) ...................... 25.0 (95.0)
Oil Capacity, qts (L) ...................... 10.0 (9.5)
Cooling Capacity, qts (L) ...................... 17.0 (16.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100HS roller chain
Front Tire Size ...................... 33x15.5x16.5
Rear Tire Size ...................... 33x15.5x16.5
Maximum Speed (Single), mph (km/h) ...................... 7.2 (11.6)
Maximum Speed (Two), mph (km/h) ...................... 12.5 (20.1)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 20.7 (78.4)
Pump Capacity (High Flow), gpm (Lpm) ...................... 30.7 (116.3)
System Pressure, Bar (psi) ...................... 200 (2900)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2750 (1275)
Tipping Load, lbs (kg) ...................... 5500 (2550)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48.8 (1240)
Height (Operator Cab), in (mm) ...................... 79 (2005)
Height (Boom Raised), in (mm) ...................... 159.1 (4040)
Length (w/o Bucket), in (mm) ...................... 112.1 (2845)
Length (Bucket On Ground), in (mm) ...................... 140.6 (3570)
Width (w/o Bucket), in (mm) ...................... 60 (1525)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 124.3 (3155)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 99 (2515)
Dump Reach At Max Height, in (mm) ...................... 40 (1015)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 101
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (Front w/Bucket), in (mm) ...................... 84.2 (2140)
Operating Weight, lbs (kg) ...................... 8760 (3975)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |