____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 873 G-Series |
Bobcat 873 G-Series Specifications
The
873G G-Series skid steer loader is powered by Deutz BF4M1011F 4-cylinder
turbocharged diesel engine with a rated power of 73.5 hp (54.8 kW) at 2600 rpm.
The Bobcat 873G is equipped with a vertical-lift loader boom, 1-speed or 2-speed
hydrostatic transmission, 100HS drive chains, and 12x16.5 standard tires. The
hydraulic system has a pump with fluid flow rate of 18 gpm (68 lpm) or 30.7 gpm
(116.3 lpm). The hydraulic pressure is 2900 psi (200 bar). The skid steer loader
has a rated operating capacity of 2400 lbs (1090 kg) and tipping load of 4800
lbs (2180 kg). The lift height is 124.3" (3155 mm) to hinge pin, and dump height
is 97.3" (2470 mm).
| Engine Specs |
Engine Model ...................... Deutz BF4M1011F
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 178 (2.92)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 73.5 (54.8)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 222 (164)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1125-2770
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Fuel Tank Capacity, gal (L) ...................... 25.0 (95.0)
Oil Capacity, qts (L) ...................... 10.0 (9.5)
Cooling Capacity, qts (L) ...................... 17.0 (16.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100HS roller chain
Front Tire Size ...................... 12.00x16.5
Rear Tire Size ...................... 12.00x16.5
Chaincase Capacity, qts (L) ...................... 40.0 (38.0)
Maximum Speed (Single), mph (km/h) ...................... 7.9 (12.6)
Maximum Speed (Two), mph (km/h) ...................... 12.2 (19.5)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 18.0 (68.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 30.7 (116.3)
System Pressure, Bar (psi) ...................... 200 (2900)
Hydraulic Reservoir Capacity, gal (L) ...................... 5.3 (19.9)
Hydraulic System Capacity, gal (L) ...................... 13.0 (49.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2400 (1090)
Tipping Load, lbs (kg) ...................... 4800 (2180)
Loader Boom Type .................... Vertical-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 48.8 (1240)
Height (Operator Cab), in (mm) ...................... 78 (1980)
Height (Boom Raised), in (mm) ...................... 159.1 (4040)
Length (w/o Bucket), in (mm) ...................... 112.1 (2845)
Length (Bucket On Ground), in (mm) ...................... 140.6 (3570)
Width (w/o Bucket), in (mm) ...................... 60 (1525)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 124.3 (3155)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 97.3 (2470)
Dump Reach At Max Height, in (mm) ...................... 37.7 (955)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 27.5
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (Front w/Bucket), in (mm) ...................... 84.2 (2140)
Operating Weight, lbs (kg) ...................... 6850 (3110)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |