____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 863G |
Bobcat 863 G-Series Specifications
The
Bobcat 863G skid steer loader driveline system components: Deutz BF4M1011F
vertical four-cylinder turbocharged liquid-cooled diesel engine with a rated
power of 73 hp (54 kW), and 1-speed or 2-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 20 gal/min (76.8 l/min) or
30 gal/min (113.6 l/min). The Bobcat 863 G-Series is equipped with radial-lift
loader boom, 100HS drive chains, and 12.00x16.5 or 33x15.5x16.5 tires. The
loader has a max lift height is 121 inches (3075 mm) to hinge pin, and dump
height is 91.5 inches (2325 mm). The rated operating capacity is 1900 lbs (862
kg), and tipping load is 3800 lbs (1725 kg).
| Engine Specs |
Engine Model ...................... Deutz BF4M1011F
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 178 (2.92)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 73.0 (54.0)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 222 (164)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1125-2770
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Fuel Tank Capacity, gal (L) ...................... 25.0 (95.0)
Oil Capacity, qts (L) ...................... 10.0 (9.5)
Cooling Capacity, qts (L) ...................... 17.0 (16.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 100HS roller chain
Front Tire Size (Std) ...................... 12.00x16.5
Rear Tire Size (Std) ...................... 12.00x16.5
Front Tire Size (Opt) ...................... 33x15.5x16.5
Rear Tire Size (Opt) ...................... 33x15.5x16.5
Maximum Speed (Single), mph (km/h) ...................... 6.6 (10.6)
Maximum Speed (Two), mph (km/h) ...................... 12.5 (20.1)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 20.0 (75.8)
Pump Capacity (High-Flow), gpm (Lpm) ...................... 30.0 (113.6)
System Pressure, Bar (psi) ...................... 206 (3000)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1900 (862)
Tipping Load, lbs (kg) ...................... 3800 (1725)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 43.7 (1110)
Height (Operator Cab), in (mm) ...................... 82.3 (2090)
Height (Boom Raised), in (mm) ...................... 156.2 (3970)
Length (w/o Bucket), in (mm) ...................... 106.9 (2715)
Length (Bucket On Ground), in (mm) ...................... 135.4 (3440)
Width (w/o Bucket), in (mm) ...................... 54.4 (1380)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121 (3075)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 91.5 (2325)
Dump Reach At Max Height, in (mm) ...................... 21.3 (540)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 29
Bucket Width (Std), in (mm) ...................... 68 (1730)
Bucket Width (Opt), in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (Front w/Bucket), in (mm) ...................... 83.7 (2165)
Shipping Weight, lbs (kg) ...................... 6535 (2970)
Operating Weight, lbs (kg) ...................... 7045 (3200)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |