____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 863 |
Bobcat 863 Specifications
The
Bobcat 863 skid steer loader driveline system components: a 166.7 cu.in (2.7L)
Deutz BF4M1011 four-cylinder turbocharged liquid-cooled diesel engine
with a rated power of 73.5 hp (54.8 kW), and 1-speed hydrostatic transmission.
The hydraulic system has a pump with a rated capacity of 18 gal/min (68 l/min).
The system relief pressure is 3000 psi (206 bar). The Bobcat 863 is equipped
with a radial-lift loader boom, 100HS drive chains, and 12.00x16.5 tires. The
skid steer has a max lift height of 121" (3075 mm) to hinge pin and
dump height of 91.5" (2325 mm). The rated operating capacity is 2000 lbs (907
kg), and tipping load is 4000 lbs (1815 kg).
| Engine Specs |
Engine Model ...................... Deutz BF4M1011
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 166.7 (2.73)
Cylinder Bore, in (mm) ...................... 3.58 (91.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 73.5 (54.8)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 222 (164)
Torque Speed, rpm ...................... 1800
Idling Speed, rpm ...................... 1125-2770
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dual element
Fuel Tank Capacity, gal (L) ...................... 25.0 (95.0)
Oil Capacity, qts (L) ...................... 10.0 (9.5)
Cooling Capacity, qts (L) ...................... 17.0 (16.1)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 100HS roller chain
Front Tire Size (Std) ...................... 12.00x16.5
Rear Tire Size (Std) ...................... 12.00x16.5
Front Tire Size (Opt) ...................... 31x15.5x15
Rear Tire Size (Opt) ...................... 31x15.5x15
Forward Speed, mph (km/h) ...................... 7.3 (11.6)
Reverse Speed, mph (km/h) ...................... 7.3 (11.6)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 18.0 (68.0)
System Pressure, Bar (psi) ...................... 206 (3000)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 2000 (907)
Tipping Load, lbs (kg) ...................... 4000 (1815)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 43.7 (1110)
Height (Operator Cab), in (mm) ...................... 81.3 (2065)
Height (Boom Raised), in (mm) ...................... 156.2 (3970)
Length (w/o Bucket), in (mm) ...................... 107.2 (2725)
Length (Bucket On Ground), in (mm) ...................... 135.8 (3450)
Width (w/o Bucket), in (mm) ...................... 57.4 (1460)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 121 (3075)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 91.5 (2325)
Dump Reach At Max Height, in (mm) ...................... 21.3 (540)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 72 (1830)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (Front w/Bucket), in (mm) ...................... 83.7 (2165)
Shipping Weight, lbs (kg) ...................... 6755 (3070)
Operating Weight, lbs (kg) ...................... 7400 (3365)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |