Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 773 F-Series |
Bobcat 773 F-Series Specifications
The Bobcat 773 F-Series skid steer loader is powered by Kubota V2203-EB 4-cylinder water-cooled diesel engine with a rated power of 46 hp (34 kW) at 2800 rpm. The Bobcat 773 is equipped with a vertical-lift loader boom, 1-speed hydrostatic transmission, 80HS drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 16.7 gpm (63 lpm) or 27 gpm (102 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 1750 lbs (795 kg) and tipping load of 3900 lbs (1770 kg). The lift height is 118.2 inches (3000 mm) to hinge pin, and dump height is 91 inches (2310 mm).
Engine Specs |
Engine Model ...................... Kubota V2203-EB
Engine Type ...................... Vertical inline 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2800
Idling Speed, rpm ...................... 1250
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Cell starter (with glow plug)
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 23.0 (87.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Cooling Capacity, qts (L) ...................... 10.5 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 12.00x16.5
Rear Tire Size (Opt) ...................... 12.00x16.5
Maximum Speed, mph (km/h) ...................... 7.0 (11.3)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 16.7 (63.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 27.0 (102.0)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.4)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1750 (795)
Tipping Load, lbs (kg) ...................... 3900 (1770)
Loader Boom Type .................... Vertical-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 40.6 (1030)
Height (Operator Cab), in (mm) ...................... 76.3 (1940)
Height (Boom Raised), in (mm) ...................... 152.1 (3865)
Length (w/o Bucket), in (mm) ...................... 101.8 (2580)
Length (Bucket On Ground), in (mm) ...................... 130.3 (3310)
Width (w/o Bucket), in (mm) ...................... 54.5 (1385)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 118.2 (3000)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 91 (2310)
Dump Reach At Max Height, in (mm) ...................... 29.6 (750)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 23
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 78.8 (2000)
Operating Weight, lbs (kg) ...................... 5810 (2635)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |