____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 763 G-Series |
Bobcat 763 G-Series Specifications
The
Bobcat 763 G-Series skid steer loader driveline system components: a 134.1 cu.in
(2.2L) Kubota V2203-EB 4-cylinder water-cooled diesel engine with a rated power
of 46 hp (34 kW), and 1-speed hydrostatic transmission. The hydraulic system has
a pump with a rated capacity of 15 gal/min (56 l/min). The system relief
pressure is 3000 psi (207 bar). The Bobcat 763G is equipped with a radial-lift
loader boom, 80HS drive chains, and 10.00x16.5 standard tires. The skid steer
loader has a max lift height of 114.5" (2910 mm) to hinge pin and dump
height of 84.6" (2150 mm). The rated operating capacity is 1500 lbs (680 kg),
and tipping load is 3000 lbs (1360 kg).
| Engine Specs |
Engine Model ...................... Kubota V2203-EB
Engine Type ...................... Vertical inline 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.0)
Rated Engine Speed, rpm ...................... 2800
Idling Speed, rpm ...................... 1250
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Cell starter (with glow plug)
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 14.0 (53.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Cooling Capacity, qts (L) ...................... 10.5 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size (Std) ...................... 10.00x16.5
Rear Tire Size (Std) ...................... 10.00x16.5
Front Tire Size (Opt) ...................... 31x15.5x15
Rear Tire Size (Opt) ...................... 31x15.5x15
Chaincase Capacity, qts (L) ...................... 36.0 (34.0)
Maximum Speed, mph (km/h) ...................... 7.0 (11.3)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 15.0 (56.0)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.4)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1500 (680)
Tipping Load, lbs (kg) ...................... 3000 (1360)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 40.6 (1030)
Height (Operator Cab), in (mm) ...................... 77.3 (1965)
Height (Boom Raised), in (mm) ...................... 148.2 (3765)
Length (w/o Bucket), in (mm) ...................... 101.7 (2575)
Length (Bucket On Ground), in (mm) ...................... 130.1 (3305)
Width (w/o Bucket), in (mm) ...................... 50 (1270)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2910)
Dump Angle At Max Height, deg ...................... 44
Dump Height (Fully Raised), in (mm) ...................... 84.6 (2150)
Dump Reach At Max Height, in (mm) ...................... 19.1 (485)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 92
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 62 (1575)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 78.5 (1995)
Operating Weight, lbs (kg) ...................... 5370 (2435)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |