____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 753 |
Bobcat 753 Specifications
The
Bobcat 753 skid steer loader driveline system components: a 134.1 cu.in (2.2L)
Kubota V2203-EB vertical 4-cylinder water-cooled diesel engine with a rated
power of 43 hp (31.8 kW), and single-speed hydro transmission. The hydraulic
system has a pump with a rated capacity of 15.9 gal/min (60.1 l/min). The system
relief pressure is 2750 psi (190 bar). The Bobcat 753 is equipped with a
radial-lift loader boom, 80HS drive chains, and 10.00x16.5 standard tires. The
skid steer loader has a max lift height of 109.1" (2770 mm) to hinge pin and
dump height of 84.6" (2150 mm). The rated operating capacity is 1300 lbs (590
kg), and tipping load is 2600 lbs (1180 kg).
| Engine Specs |
Engine Model ...................... Kubota V2203-EB
Engine Type ...................... Vertical inline 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 43.0 (31.8)
Rated Engine Speed, rpm ...................... 2800
Idling Speed, rpm ...................... 1250
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Cell starter (with glow plug)
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 14.0 (53.0)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Cooling Capacity, qts (L) ...................... 10.5 (10.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 31.8 (30.3)
Maximum Speed, mph (km/h) ...................... 6.6 (10.5)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 15.9 (60.1)
System Pressure, Bar (psi) ...................... 190 (2750)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.7)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2600 (1180)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.5 (900)
Height (Operator Cab), in (mm) ...................... 77 (1955)
Height (Boom Raised), in (mm) ...................... 139.2 (3535)
Length (w/o Bucket), in (mm) ...................... 96.3 (2445)
Length (Bucket On Ground), in (mm) ...................... 120.5 (3060)
Width (w/o Bucket), in (mm) ...................... 50.3 (1280)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109.1 (2770)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 84.6 (2150)
Dump Reach At Max Height, in (mm) ...................... 19.1 (485)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 96
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.3 (1760)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44 (1120)
Turning Radius (Rear), in (mm) ...................... 59.4 (1505)
Operating Weight, lbs (kg) ...................... 4740 (2150)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |