Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 751 |
Bobcat 751 Specifications
The Bobcat 751 skid steer loader is powered by Peugeot XUD9 4-cylinder diesel engine with a rated power of 38 hp (28.4 kW) or Kubota V1903 4-cylinder diesel engine with a rated power of 35 hp (26.5 kW). The Bobcat 751 is equipped with a radial-lift loader boom, 1-speed hydrostatic transmission, 80HS drive chains, and 10.00x16.5 standard tires. The hydraulic system has a pump with fluid flow rate of 13 gpm (49.2 lpm). The hydraulic pressure is 2500 psi (172 bar). The skid steer loader has a rated operating capacity of 1200 lbs (545 kg) and tipping load of 2400 lbs (1090 kg). The lift height is 109.4" (2780 mm) to hinge pin, and dump height is 86.3" (2190 mm).
Peugeot Engine Specs |
Engine Model ...................... Peugeot XUD9
Engine Type ...................... Vertical inline 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 116 (1.9)
Cylinder Bore, in (mm) ...................... 3.27 (83.0)
Piston Stroke, in (mm) ...................... 3.47 (88.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 38.0 (28.4)
Rated Engine Speed, rpm ...................... 3100
Maximum Torque, Nm (lb-ft) ...................... 113 (83)
Torque Speed, rpm ...................... 1600
Idling Speed, rpm ...................... 1100
Firing Order ...................... 1-3-4-2
Fuel System ...................... Fuel injection
Governor Type ...................... Mechanical
Lubrication System ...................... Pressure lubrication
Air Cleaner Type ...................... Dry dual element
Fuel Tank Capacity, gal (L) ...................... 14.0 (53.0)
Oil Capacity, qts (L) ...................... 6.0 (5.7)
Cooling Capacity, qts (L) ...................... 13.0 (12.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
Kubota Engine Specs |
Engine Model ...................... Kubota V1903
Engine Type ...................... Vertical inline 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 113.3 (1.86)
Cylinder Bore, in (mm) ...................... 3.15 (80.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 35.0 (26.5)
Rated Engine Speed, rpm ...................... 3000
Idling Speed, rpm ...................... 1250
Compression Ratio ...................... 23:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Cell starter (with glow plug)
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 14.0 (53.0)
Oil Capacity, qts (L) ...................... 8.4 (8.0)
Cooling Capacity, qts (L) ...................... 9.5 (9.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Chaincase Capacity, qts (L) ...................... 31.8 (30.3)
Maximum Speed, mph (km/h) ...................... 6.0 (9.7)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 13.0 (49.2)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.7)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1200 (545)
Tipping Load, lbs (kg) ...................... 2400 (1090)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 76.1 (1930)
Height (Boom Raised), in (mm) ...................... 140 (3555)
Length (w/o Bucket), in (mm) ...................... 96 (2440)
Length (Bucket On Ground), in (mm) ...................... 121.1 (3075)
Width (w/o Bucket), in (mm) ...................... 47 (1195)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109.4 (2780)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 86.3 (2190)
Dump Reach At Max Height, in (mm) ...................... 21.8 (555)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.1 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 59.7 (1515)
Operating Weight, lbs (kg) ...................... 4750 (2155)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |