____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 742 |
Bobcat 742 Specifications
The
Bobcat 742 skid steer loader driveline system components: a 98 cu.in (1.6L) Ford
1498 4-cycle 4-cylinder liquid-cooled gasoline engine with a rated power of 34
hp (25.4 kW), and 1-speed hydrostatic transmission. The hydraulic system has a
pump with a rated capacity of 11 gal/min (41.6 l/min). The system relief
pressure is 2400 psi (165 bar). The Bobcat 742 is equipped with a radial-lift
loader boom, 80HS drive chains, and 7.00x15 standard tires. The skid steer
loader has a max lift height of 109" (2770 mm) to hinge pin and dump height
of 86.3" (2190 mm). The rated operating capacity is 1300 lbs (590 kg), and
tipping load is 2600 lbs (1180 kg).
| Engine Specs |
Engine Model ...................... Ford 1498
Engine Type ...................... 4-cycle 4-cylinder gasoline engine
Number of Cylinders ...................... Four
Cylinder Bore, in (mm) ...................... 3.19 (81.0)
Piston Stroke, in (mm) ...................... 3.06 (77.6)
Displacement, cu.in (cm3) ...................... 98 (1.6)
Maximum Power, Hp (kW) ...................... 34.0 (25.4)
Maximum Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 98.7 (72.8)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 8.0:1
Firing Order ...................... 1-2-4-3
Fuel System ...................... Carburetor
Fuel Pump Type ...................... Mechanical
Air Cleaner Type ...................... Dry element
Cooling System ...................... Liquid-cooled
Starting System ...................... Electric start
Spark Plug Type ...................... AGR22
Spark Plug Gap, in (mm) ...................... 0.023 (0.58)
Distributor Point Gap, in (mm) ...................... 0.025 (0.64)
Valve Lash (Intake), in (mm) ...................... 0.008 (0.20)
Valve Lash (Exhaust), in (mm) ...................... 0.018 (0.45)
Fuel Tank Capacity, gal (L) ...................... 13.0 (49.0)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80HS roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Chaincase Capacity, qts (L) ...................... 32.0 (30.3)
Maximum Speed, mph (km/h) ...................... 6.0 (9.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (41.6)
System Pressure, Bar (psi) ...................... 165 (2400)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.2)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.7)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2600 (1180)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 75.8 (1925)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 94.5 (2425)
Length (Bucket On Ground), in (mm) ...................... 120.4 (3060)
Width (w/o Bucket), in (mm) ...................... 47 (1195)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 86.3 (2190)
Dump Reach At Max Height, in (mm) ...................... 21.8 (555)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 100
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Shipping Weight, lbs (kg) ...................... 4160 (1890)
Operating Weight, lbs (kg) ...................... 4730 (2145)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |