____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 733 |
Bobcat 733 Specifications
The
Clark Bobcat 733 skid steer loader is powered by 105.7 cu.in (1.7L) Kubota V1702
4-cylinder naturally aspirated liquid-cooled diesel engine with a rated power of
36 hp (26.8 kW) at 2800 rpm. The Clark Bobcat 733 is equipped with a
single-speed hydro transmission, radial-lift loader boom, 80H drive chains, and
10.00x16.5 tires. The hydraulic system has a pump with fluid flow rate of 11 gpm
(42 lpm). The hydraulic pressure is 2500 psi (172 bar). The skid steer has a
rated operating capacity of 1300 lbs (590 kg) and tipping load of 2600 lbs (1180
kg). The max lift height is 109 inches (2770 mm) to hinge pin, and dump height
is 88.4 inches (2245 mm).
| Engine Specs |
Engine Model ...................... Kubota V1702
Engine Type ...................... Vertical inline 4-cylinder water-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 105.7 (1.73)
Cylinder Bore, in (mm) ...................... 3.23 (82.0)
Piston Stroke, in (mm) ...................... 3.23 (82.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 36.0 (26.8)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 108 (80)
Torque Speed, rpm ...................... 1600
Firing Order ...................... 1-3-4-2
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Bosch type
Governor Type ...................... Mechanical
Lubricating System ...................... Full pressure
Oil Filter Type ...................... Full flow paper element
Cooling System ...................... Liquid-cooled
Air Cleaner Type ...................... Dry element
Fuel Tank Capacity, gal (L) ...................... 9.0 (34.0)
Oil Capacity, qts (L) ...................... 9.0 (8.5)
Cooling Capacity, qts (L) ...................... 13.0 (12.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 55
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size ...................... 10.00x16.5
Rear Tire Size ...................... 10.00x16.5
Forward Speed, mph (km/h) ...................... 6.0 (9.7)
Reverse Speed, mph (km/h) ...................... 6.0 (9.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic System Capacity, gal (L) ...................... 11.3 (43.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2600 (1180)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 75.6 (1920)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 95.4 (2425)
Length (Bucket On Ground), in (mm) ...................... 120.4 (3060)
Width (w/o Bucket), in (mm) ...................... 45.6 (1160)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ...................... 24 (610)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Operating Weight, lbs (kg) ...................... 4400 (2000)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |