____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 732 |
Bobcat 732 Specifications
The
Clark Bobcat 732 skid steer loader driveline system components: a 98 cu.in
(1.6L) Ford 1498 four-cycle four-cylinder gasoline engine with a rated power of
30 hp (22 kW), and single-speed hydrostatic transmission. The hydraulic system
has a pump with a rated capacity of 11 gal/min (42 l/min). The system relief
pressure is 2500 psi (172 bar). The Clark Bobcat 732 is equipped with a
radial-lift loader boom, 80H roller drive chains, and 7.00x15 standard tires.
The skid steer loader has a maximum lift height of 109" (2770 mm) to hinge pin
and dump height of 88.4" (2245 mm). The rated operating capacity is 1300 lbs
(590 kg), and tipping load is 2670 lbs (1210 kg).
| Engine Specs |
Engine Model ...................... Ford 1498
Engine Type ...................... 4-cycle 4-cylinder gasoline engine
Number of Cylinders ...................... Four
Cylinder Bore, in (mm) ...................... 3.19 (81.0)
Piston Stroke, in (mm) ...................... 3.06 (77.6)
Displacement, cu.in (cm3) ...................... 98 (1.6)
Maximum Power, Hp (kW) ...................... 30.0 (22.0)
Maximum Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 96 (71)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 8.0:1
Firing Order ...................... 1-2-4-3
Fuel System ...................... Carburetor
Fuel Pump Type ...................... Mechanical
Air Cleaner Type ...................... Dry element
Cooling System ...................... Liquid-cooled
Starting System ...................... Electric start
Spark Plug Type ...................... AGR22
Spark Plug Gap, in (mm) ...................... 0.023 (0.58)
Distributor Point Gap, in (mm) ...................... 0.025 (0.64)
Valve Lash (Intake), in (mm) ...................... 0.008 (0.20)
Valve Lash (Exhaust), in (mm) ...................... 0.018 (0.45)
Fuel Tank Capacity, gal (L) ...................... 9.0 (34.0)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 37
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size (Std) ...................... 7.00x15
Rear Tire Size (Std) ...................... 7.00x15
Front Tire Size (Opt) ...................... 10.00x16.5
Rear Tire Size (Opt) ...................... 10.00x16.5
Forward Speed, mph (km/h) ...................... 6.0 (9.7)
Reverse Speed, mph (km/h) ...................... 6.0 (9.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic System Capacity, gal (L) ...................... 11.3 (43.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2670 (1210)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 75.6 (1920)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 95.4 (2425)
Length (Bucket On Ground), in (mm) ...................... 120.4 (3060)
Width (w/o Bucket), in (mm) ...................... 45.6 (1160)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ...................... 24 (610)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Operating Weight, lbs (kg) ...................... 4220 (1920)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |