____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 731 |
Bobcat 731 Specifications
The
Clark Bobcat 731 skid steer loader driveline system components: a 101 cu.in
(1.6L) Deutz F2L511D 2-cylinder direct injection liquid-cooled diesel engine
with a rated power of 32 hp (23.7 kW), and 1-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 11 gal/min (42 l/min). The
system relief pressure is 2500 psi (172 bar). The Clark Bobcat 731 is equipped
with radial-lift loader boom, 80H drive chains, and 7.00x15 tires. The loader
has a max lift height is 109 inches (2770 mm) to hinge pin, and dump height is
88.4 inches (2245 mm). The rated operating capacity is 1300 lbs (590 kg), and
tipping load is 2600 lbs (1180 kg).
| Engine Specs |
Engine Model ...................... Deutz F2L511D
Engine Type ...................... 4-cycle 2-cylinder liquid-cooled diesel
Number of Cylinders ...................... Two
Displacement, cu.in (L) ...................... 101 (1.65)
Cylinder Bore, in (mm) ...................... 3.94 (100.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 32.0 (23.7)
Rated Engine Speed, rpm ...................... 2700
Firing Order ...................... 2-1
Fuel System ...................... Direct injection
Fuel Injection Pump ...................... Bosch
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Valve Clearance (Inlet), in (mm) ...................... 0.006 (0.15)
Valve Clearance (Exhaust), in (mm) ...................... 0.006 (0.15)
Fuel Tank Capacity, gal (L) ...................... 9.0 (34.0)
Oil Capacity, qts (L) ...................... 3.7 (3.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 37
| Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears ...................... Single
Chain Drive Type ...................... 80H roller chain
Front Tire Size (Std) ...................... 7.00x15
Rear Tire Size (Std) ...................... 7.00x15
Front Tire Size (Opt) ...................... 10.00x16.5
Rear Tire Size (Opt) ...................... 10.00x16.5
Forward Speed, mph (km/h) ...................... 6.0 (9.7)
Reverse Speed, mph (km/h) ...................... 6.0 (9.7)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (42.0)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic System Capacity, gal (L) ...................... 11.3 (43.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1300 (590)
Tipping Load, lbs (kg) ...................... 2600 (1180)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35.4 (900)
Height (Operator Cab), in (mm) ...................... 75.6 (1920)
Height (Boom Raised), in (mm) ...................... 139.6 (3545)
Length (w/o Bucket), in (mm) ...................... 95.4 (2425)
Length (Bucket On Ground), in (mm) ...................... 120.4 (3060)
Width (w/o Bucket), in (mm) ...................... 45.6 (1160)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 31
Dump Height (Fully Raised), in (mm) ...................... 88.4 (2245)
Dump Reach At Max Height, in (mm) ...................... 24 (610)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 93
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 7.5 (190)
Turning Radius (Front w/Bucket), in (mm) ...................... 69.7 (1770)
Turning Radius (Front w/o Bucket), in (mm) ...................... 44.2 (1125)
Turning Radius (Rear), in (mm) ...................... 58.5 (1485)
Operating Weight, lbs (kg) ...................... 4500 (2045)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |