Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 722 |
Bobcat 722 Specifications
The Bobcat 722 skid steer loader is powered by 98 cu.in (1.6L) Ford 1498 four-cylinder liquid-cooled gasoline engine with a rated power of 33 hp (22 kW) at 2800 rpm. The Bobcat 722 is equipped with a radial-lift loader boom, single-speed or two-speed hydrostatic transmission, 80H drive chains, and 7.00x15 standard tires. The hydraulic system has a pump with fluid flow rate of 10 gpm (37.9 lpm). The hydraulic pressure is 2100 psi (145 bar). The skid steer loader has a rated operating capacity of 1200 lbs (540 kg) and tipping load of 2400 lbs (1080 kg). The lift height is 109 inches (2770 mm) to hinge pin, and dump height is 86 inches (2185 mm).
Engine Specs |
Engine Model ...................... Ford 1498
Engine Type ...................... 4-cycle 4-cylinder gasoline engine
Number of Cylinders ...................... Four
Cylinder Bore, in (mm) ...................... 3.19 (81.0)
Piston Stroke, in (mm) ...................... 3.06 (77.6)
Displacement, cu.in (cm3) ...................... 98 (1.6)
Maximum Power, Hp (kW) ...................... 30.0 (22.0)
Maximum Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 96 (71)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 8.0:1
Firing Order ...................... 1-2-4-3
Fuel System ...................... Carburetor
Fuel Pump Type ...................... Mechanical
Air Cleaner Type ...................... Dry element
Cooling System ...................... Liquid-cooled
Starting System ...................... Electric start
Spark Plug Type ...................... AGR22
Spark Plug Gap, in (mm) ...................... 0.023 (0.58)
Distributor Point Gap, in (mm) ...................... 0.025 (0.64)
Valve Lash (Intake), in (mm) ...................... 0.008 (0.20)
Valve Lash (Exhaust), in (mm) ...................... 0.018 (0.45)
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Coolant Capacity, qts (L) ...................... 11.0 (10.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 22
Drive Train |
Drive System Type ...................... Hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 80H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed (Single), mph (km/h) ...................... 4.2 (6.8)
Maximum Speed (Two), mph (km/h) ...................... 6.3 (10.1)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Vane
Pump Capacity, gpm (Lpm) ...................... 10.0 (37.9)
System Pressure, Bar (psi) ...................... 145 (2100)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1200 (540)
Tipping Load, lbs (kg) ...................... 2400 (1080)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator Cab), in (mm) ...................... 81.5 (2045)
Height (Boom Raised), in (mm) ...................... 139 (3530)
Length (w/o Bucket), in (mm) ...................... 89 (2260)
Length (Bucket On Ground), in (mm) ...................... 114 (2895)
Width (w/o Bucket), in (mm) ...................... 45.5 (1155)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 35
Dump Height (Fully Raised), in (mm) ...................... 86 (2185)
Dump Reach At Max Height, in (mm) ...................... 20 (505)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 67 (1710)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41 (1040)
Turning Radius (Rear), in (mm) ...................... 53.5 (1360)
Operating Weight, lbs (kg) ...................... 4400 (2000)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |