Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 720

Bobcat 720 Specifications

The Bobcat 720 skid steer loader driveline system components: Wisconsin VF4D 4-cylinder air-cooled gasoline/LPG engine with a rated power of 28 hp (20.9 kW), and 1-speed or 2-speed hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 10 gal/min (37.9 l/min). The system relief pressure is 2100 psi (145 bar). The Bobcat 720 is equipped with a radial-lift loader boom, 80H drive chains, and 7.00x15 standard tires. The skid steer loader has a maximum lift height of 109" (2770 mm) to hinge pin and dump height of 87" (2210 mm). The rated operating capacity is 1200 lbs (544 kg), and tipping load is 2400 lbs (1090 kg).

Engine Specs

Engine Model ...................... Wisconsin VF4D
Engine Type ...................... 4-cycle 4-cylinder gasoline/LPG engine
Number of Cylinders ...................... Four
Total Displacement, cu.in (L) ...................... 107.7 (1.77)
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 28.0 (20.9)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 89.8 (66.2)
Torque Speed, rpm ...................... 1800
Firing Order ...................... 1-3-4-2
Fuel System ...................... Carburetor
Lubricating System ...................... Oil spray
Oil Filter Type ...................... Full flow replaceable element
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Ignition System ...................... Distributor
Spark Plug Gap, in (mm) ...................... 0.018-0.022 (0.46-0.56)
Breaker Point Gap, in (mm) ...................... 0.03 (0.76)
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 22

Drive Train

Drive System Type ...................... Hydrostatic transmission
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two
Chain Drive Type ...................... 80H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed (Single), mph (km/h) ...................... 4.2 (6.8)
Maximum Speed (Two), mph (km/h) ...................... 6.3 (10.1)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Vane
Pump Capacity, gpm (Lpm) ...................... 10.0 (37.9)
System Pressure, Bar (psi) ...................... 145 (2100)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 1200 (544)
Tipping Load, lbs (kg) ...................... 2400 (1090)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator Cab), in (mm) ...................... 83 (2180)
Height (Boom Raised), in (mm) ...................... 138 (3505)
Length (w/o Bucket), in (mm) ...................... 88 (2235)
Length (Bucket On Ground), in (mm) ...................... 111.5 (2830)
Width (w/o Bucket), in (mm) ...................... 45.8 (1160)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109 (2770)
Dump Angle At Max Height, deg ...................... 36
Dump Height (Fully Raised), in (mm) ...................... 87 (2210)
Dump Reach At Max Height, in (mm) ...................... 16.5 (420)
Rollback Angle At Ground Level, deg ...................... 26
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 65 (1650)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41 (1040)
Turning Radius (Rear), in (mm) ...................... 54 (1370)
Operating Weight, lbs (kg) ...................... 4230 (1920)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS