____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat M611 |
Bobcat M611 Specifications
The
Bobcat 611 skid steer loader driveline system components: a 85.2 cu.in (1.4L)
Deutz F2L411 4-cycle 2-cylinder air-cooled diesel engine with a rated power of
27.5 hp (20.5 kW), and variable sheave transmission. The hydraulic system has a
pump with a rated capacity of 8.7 gal/min (32.1 l/min). The system relief
pressure is 1700 psi (117 bar). The Bobcat 611 is equipped with a radial-lift
loader boom, 60H drive chains, and 7.00x15 standard tires. The skid steer loader
has a maximum lift height of 108" (2745 mm) to hinge pin and dump height of 86"
(2185 mm). The rated operating capacity is 1000 lbs (454 kg), and tipping load
is 2100 lbs (955 kg).
| Engine Specs |
Engine Model ...................... Deutz F2L411
Engine Type ...................... 4-cycle 2-cylinder liquid-cooled diesel
Number of Cylinders ...................... Two
Displacement, cu.in (L) ...................... 85.2 (1.39)
Cylinder Bore, in (mm) ...................... 3.62 (92.0)
Piston Stroke, in (mm) ...................... 4.13 (105.0)
Aspiration Type ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 27.5 (20.5)
Rated Engine Speed, rpm ...................... 2700
Maximum Torque, Nm (lb-ft) ...................... 79 (58)
Torque Speed, rpm ...................... 2000
Firing Order ...................... 2-1
Fuel System ...................... Injection pump
Fuel Injection Pump ...................... Bosch
Lubrication System ...................... Pressure lubrication with oil filter
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Valve Clearance (Inlet), in (mm) ...................... 0.006 (0.15)
Valve Clearance (Exhaust), in (mm) ...................... 0.006 (0.15)
Fuel Tank Capacity, gal (L) ...................... 7.0 (26.0)
Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 22
| Drive Train |
Drive System Type ...................... Variable Speed Sheave
Clutch Type ...................... 4 Single discs
Chain Drive Type ...................... 60H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed, mph (km/h) ...................... 6.4 (10.2)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 8.7 (32.1)
System Pressure, Bar (psi) ...................... 117 (1700)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)
Hydraulic System Capacity, gal (L) ...................... 20.0 (75.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1000 (454)
Tipping Load, lbs (kg) ...................... 2100 (955)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator Cab), in (mm) ...................... 81.7 (2075)
Height (Boom Raised), in (mm) ...................... 138 (3505)
Length (w/o Bucket), in (mm) ...................... 79 (2005)
Length (Bucket On Ground), in (mm) ...................... 107 (2720)
Width (w/o Bucket), in (mm) ...................... 46 (1170)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 108 (2745)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 86 (2185)
Dump Reach At Max Height, in (mm) ...................... 31 (785)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 65 (1650)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41.5 (1055)
Turning Radius (Rear), in (mm) ...................... 48 (1220)
Operating Weight, lbs (kg) ...................... 4200 (1900)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |