____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat M610 |
Bobcat M610 Specifications
The
Bobcat M610 skid steer loader is powered by 107.7 cubic inches (1.8 L) Wisconsin VF4D 4-cycle 4-cylinder
air-cooled gasoline/LPG engine with a rated power of 30 hp (22 kW) at 2800 rpm.
The Bobcat M610 is equipped with a radial-lift loader boom, variable sheave
transmission, 60H drive chains, and 7.00x15 standard tires. The hydraulic system
has a pump with fluid flow rate of 11 gpm (41.6 lpm). The hydraulic pressure is
1700 psi (117 bar). The skid steer loader has a rated operating capacity of 1000
lbs (454 kg) and tipping load of 2100 lbs (955 kg). The lift height is 108
inches (2745 mm) to hinge pin, and dump height is 86 inches (2185 mm).
| Engine Specs |
Engine Model ...................... Wisconsin VF4D
Engine Type ...................... 4-cycle 4-cylinder gasoline/LPG engine
Number of Cylinders ...................... Four
Total Displacement, cu.in (L) ...................... 107.7 (1.8)
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 30.0 (22.0)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 90.1 (66.2)
Torque Speed, rpm ...................... 1800
Firing Order ...................... 1-3-4-2
Fuel System ...................... Carburetor
Lubricating System ...................... Oil spray
Oil Filter Type ...................... Full flow replaceable element
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Ignition System ...................... Distributor
Spark Plug Gap, in (mm) ...................... 0.018-0.022 (0.46-0.56)
Breaker Point Gap, in (mm) ...................... 0.03 (0.76)
Fuel Tank Capacity, gal (L) ...................... 11.0 (41.6)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 22
| Drive Train |
Drive System Type ...................... Variable Speed Sheave
Clutch Type ...................... 4 Single discs
Chain Drive Type ...................... 60H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed, mph (km/h) ...................... 6.6 (10.6)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 11.0 (41.6)
System Pressure, Bar (psi) ...................... 117 (1700)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)
Hydraulic System Capacity, gal (L) ...................... 20.0 (75.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1000 (454)
Tipping Load, lbs (kg) ...................... 2100 (955)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator Cab), in (mm) ...................... 81.7 (2075)
Height (Boom Raised), in (mm) ...................... 138 (3505)
Length (w/o Bucket), in (mm) ...................... 79 (2005)
Length (Bucket On Ground), in (mm) ...................... 107 (2720)
Width (w/o Bucket), in (mm) ...................... 46 (1170)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 108 (2745)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 86 (2185)
Dump Reach At Max Height, in (mm) ...................... 31 (785)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 65 (1650)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41.5 (1055)
Turning Radius (Rear), in (mm) ...................... 48 (1220)
Operating Weight, lbs (kg) ...................... 4000 (1800)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |