____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat M600 |
Bobcat M600 Specifications
The
Bobcat M600 skid steer loader driveline system components: a 107.7 cu.in (1.8L)
Wisconsin VF4D 4-cycle 4-cylinder gasoline or LPG engine with a rated power of
25 hp (18.6 kW), and variable sheave transmission. The hydraulic system has a
pump with a rated capacity of 9.5 gal/min (36 l/min). The system relief pressure
is 1700 psi (117 bar). The Bobcat M600 is equipped with a radial-lift loader
boom, 60H drive chains, and 7.00x15 standard tires. The skid steer loader has a
max lift height of 108" (2745 mm) to hinge pin and dump height of 86" (2185
mm). The rated operating capacity is 1000 lbs (454 kg), and tipping load is 1990
lbs (905 kg).
| Engine Specs |
Engine Model ...................... Wisconsin VF4D
Engine Type ...................... 4-cycle 4-cylinder gasoline/LPG engine
Number of Cylinders ...................... Four
Total Displacement, cu.in (L) ...................... 107.7 (1.76)
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 25.0 (18.6)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 77.9 (57.5)
Torque Speed, rpm ...................... 1800
Firing Order ...................... 1-3-4-2
Fuel System ...................... Carburetor
Lubricating System ...................... Oil spray
Oil Filter Type ...................... Full flow replaceable element
Air Cleaner Type ...................... Dry replaceable cartridge
Cooling System ...................... Air-cooled
Ignition System ...................... Distributor
Spark Plug Gap, in (mm) ...................... 0.018-0.022 (0.46-0.56)
Breaker Point Gap, in (mm) ...................... 0.03 (0.76)
Fuel Tank Capacity, gal (L) ...................... 10.0 (38.0)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 22
| Drive Train |
Drive System Type ...................... Variable Speed Sheave
Clutch Type ...................... 4 Single discs
Chain Drive Type ...................... 60H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed, mph (km/h) ...................... 5.7 (9.1)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 9.5 (36.0)
System Pressure, Bar (psi) ...................... 117 (1700)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)
Hydraulic System Capacity, gal (L) ...................... 20.0 (75.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1000 (454)
Tipping Load, lbs (kg) ...................... 1990 (905)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator Cab), in (mm) ...................... 81.7 (2075)
Height (Boom Raised), in (mm) ...................... 138 (3505)
Length (w/o Bucket), in (mm) ...................... 79 (2005)
Length (Bucket On Ground), in (mm) ...................... 107 (2720)
Width (w/o Bucket), in (mm) ...................... 46 (1170)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 108 (2745)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 86 (2185)
Dump Reach At Max Height, in (mm) ...................... 31 (785)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 65 (1650)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41.5 (1055)
Turning Radius (Rear), in (mm) ...................... 48 (1220)
Operating Weight (Gas), lbs (kg) ...................... 3625 (1645)
Operating Weight (LPG), lbs (kg) ...................... 3695 (1680)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |