____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 530 |
Bobcat 530 Specifications
The
Clark Bobcat 530 skid steer loader is powered by 57.7 cu.in (0.9L) Kohler K582S
four-stroke L-head twin-cylinder air-cooled gasoline engine with a rated power
of 23 hp (17.1 kW) at 3600 rpm. The Clark Bobcat 530 is equipped with a
radial-lift loader boom, single-speed hydrostatic transmission, 60HS drive
chains, and 7.00x15 tires. The hydraulic system has a pump with fluid flow rate
of 8.3 gpm (31.5 lpm). The hydraulic pressure is 2500 psi (172 bar). The skid
steer loader has a rated operating capacity of 800 lbs (360 kg) and tipping load
of 1820 lbs (825 kg). The lift height is 102.5 inches (2600 mm) to hinge pin,
and dump height is 85 inches (2160 mm).
| Engine Specs |
Engine Model ...................... Kohler K582S
Engine Type ...................... 4-stroke L-head twin cylinder air-cooled gasoline
Number of Cylinders ...................... 2
Total Displacement, cu.in (L) ...................... 57.7 (0.95)
Cylinder Bore, in (mm) ...................... 3.51 (89.0)
Piston Stroke, in (mm) ...................... 3.00 (76.2)
Rated Engine Power, hp (kW) ...................... 23.0 (17.1)
Rated Engine Speed, rpm ...................... 3600
Fuel System ...................... Carburetor
Carburetor Type ...................... Sidedraft
Lubricating System ...................... Full pressure
Oil Filter Type ...................... Full flow replaceable element
Cooling System ...................... Air-cooled
Air Cleaner Type ...................... Dry replaceable element
Starting System ...................... Electric starting with starter
Spark Plug Type ...................... Champion RH10
Spark Plug Gap, in (mm) ...................... 0.025 (0.65)
Intake Valve Clearance, in (mm) ...................... 0.008-0.010 (0.20-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.017-0.019 (0.43-0.48)
Fuel Tank Capacity, gal (L) ...................... 10.0 (38.0)
Engine Oil Capacity, qts (L) ...................... 3.7 (3.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 25
| Drive Train |
Drive System Type ...................... Hydrostatic
Number of Gears ...................... Single
Chain Drive Type ...................... 60HS roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Forward Speed, mph (km/h) ...................... 5.3 (8.5)
Reverse Speed, mph (km/h) ...................... 5.3 (8.5)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 8.3 (31.5)
System Pressure, Bar (psi) ...................... 172 (2500)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.0 (11.4)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 800 (360)
Tipping Load, lbs (kg) ...................... 1820 (825)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 31 (785)
Height (Operator Cab), in (mm) ...................... 72.5 (1840)
Height (Boom Raised), in (mm) ...................... 127.5 (3240)
Length (w/o Bucket), in (mm) ...................... 83 (2080)
Length (Bucket On Ground), in (mm) ...................... 104 (2640)
Width (w/o Bucket), in (mm) ...................... 38 (965)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 102.5 (2600)
Dump Angle At Max Height, deg ...................... 36
Dump Height (Fully Raised), in (mm) ...................... 85 (2160)
Dump Reach At Max Height, in (mm) ...................... 18 (460)
Rollback Angle At Ground Level, deg ...................... 24
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 48 (1220)
Ground Clearance, in (mm) ...................... 7.2 (180)
Turning Radius (Front w/Bucket), in (mm) ...................... 62.5 (1590)
Turning Radius (Front w/o Bucket), in (mm) ...................... 42 (1070)
Turning Radius (Rear), in (mm) ...................... 51.5 (1310)
Shipping Weight, lbs (kg) ...................... 2730 (1240)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |