____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat M500 |
Bobcat M500 Specifications
The
Bobcat M500 skid steer loader driveline system components: a 67.2 cu.in (1.1L)
Kohler K662 L-head twin-cylinder air-cooled gasoline engine with a rated power
of 24 hp (17.9 kW), and variable sheave transmission. The hydraulic system has a
pump with a rated capacity of 7.5 gal/min (28.4 l/min). The system relief
pressure is 1700 psi (117 bar). The Bobcat M500 is equipped with a radial-lift
loader boom, 60H drive chains, and 7.00x15 standard tires. The skid steer loader
has a max lift height of 108" (2745 mm) to hinge pin and dump height of 86"
(2185 mm). The rated operating capacity is 1000 lbs (454 kg), and tipping load
is 2000 lbs (910 kg).
| Engine Specs |
Engine Model ...................... Kohler K662
Engine Type ...................... 4-cycle L-head twin-cylinder air-cooled gasoline
Number of Cylinders ...................... 2
Total Displacement, cu.in (L) ...................... 67.2 (1.1)
Cylinder Bore, in (mm) ...................... 3.62 (92.0)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 24.0 (17.9)
Rated Engine Speed, rpm ...................... 3200
Maximum Torque, Nm (lb-ft) ...................... 60.1 (44.5)
Torque Speed, rpm ...................... 2300
Fuel System ...................... Downdraft carburetor
Lubricating System ...................... Full pressure
Oil Filter Type ...................... Full flow replaceable element
Air Cleaner Type ...................... Dry replaceable element
Cooling System ...................... Air-cooled
Ignition System ...................... Magneto
Spark Plug Gap, in (mm) ...................... 0.026 (0.65)
Intake Valve Clearance, in (mm) ...................... 0.006-0.008 (0.15-0.20)
Exhaust Valve Clearance, in (mm) ...................... 0.017-0.019 (0.43-0.48)
Fuel Tank Capacity, gal (L) ...................... 11.0 (41.7)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 30
| Drive Train |
Drive System Type ...................... Variable Speed Sheave
Clutch Type ...................... 4 Single discs
Chain Drive Type ...................... 60H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed, mph (km/h) ...................... 5.7 (9.1)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 7.5 (28.4)
System Pressure, Bar (psi) ...................... 117 (1700)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)
Hydraulic System Capacity, gal (L) ...................... 20.0 (75.8)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1000 (454)
Tipping Load, lbs (kg) ...................... 2000 (910)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator ROPS), in (mm) ...................... 60 (1525)
Height (Boom Raised), in (mm) ...................... 138 (3505)
Length (w/o Bucket), in (mm) ...................... 79 (2005)
Length (Bucket On Ground), in (mm) ...................... 107 (2720)
Width (w/o Bucket), in (mm) ...................... 46 (1170)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 108 (2745)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 86 (2185)
Dump Reach At Max Height, in (mm) ...................... 17.8 (450)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 65 (1650)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41.5 (1055)
Turning Radius (Rear), in (mm) ...................... 48 (1220)
Shipping Weight, lbs (kg) ...................... 2940 (1340)
Operating Weight, lbs (kg) ...................... 3390 (1540)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |