Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 463

Bobcat 463 Specifications

The Bobcat 463 skid steer loader is powered by 61.1 cu.in (1.0L) Kubota D1005-E2B vertical 3-cylinder water-cooled diesel engine with a rated power of 22.5 hp (16.8 kW) at 3000 rpm. The Bobcat 463 is equipped with a radial-lift loader boom, single-speed hydrostatic transmission, 60HS drive chains, and 23x5.70x12 standard tires. The hydraulic system has a pump with fluid flow rate of 10 gpm (37.9 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 700 lbs (318 kg) and tipping load of 1405 lbs (637 kg). The lift height is 94.5 inches (2400 mm) to hinge pin, and dump height is 74.5 inches (1890 mm).

Engine Specs

Engine Model ...................... Kubota D1005-E2B
Engine Type ...................... 4-cycle vertical in-line IDI water-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 61.1 (1.00)
Cylinder Bore, in (mm) ...................... 2.99 (76.0)
Piston Stroke, in (mm) ...................... 2.90 (73.6)
Rated Engine Power, hp (kW) ...................... 22.5 (16.8)
Rated Engine Speed, rpm ...................... 3000
Maximum Torque, Nm (lb-ft) ...................... 58.3 (43)
Torque Speed, rpm ...................... 2000
Aspiration Type ...................... Naturally aspirated
Firing Order ...................... 1-2-3
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Injection Nozzle ...................... Bosch throttle type
Governor Type ...................... Mechanical
Lubricating System ...................... Pressure system with filter
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Electric starting with starter
Fuel Tank Capacity, gal (L) ...................... 6.5 (24.6)
Engine Oil Capacity, qts (L) ...................... 5.0 (4.7)
Coolant Capacity, qts (L) ...................... 6.0 (5.7)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 65

Drive Train

Drive System Type ...................... Fully hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 60HS roller chain
Front Tire Size (Std) ...................... 23x5.70x12
Rear Tire Size (Std) ...................... 23x5.70x12
Front Tire Size (Opt) ...................... 23x8.50x12
Rear Tire Size (Opt) ...................... 23x8.50x12
Maximum Speed, mph (km/h) ...................... 6.5 (10.5)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 10.0 (37.9)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Reservoir Capacity, gal (L) ...................... 1.3 (5.0)
Hydraulic System Capacity, gal (L) ...................... 4.0 (15.1)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 700 (318)
Tipping Load, lbs (kg) ...................... 1405 (637)
Breakout Force (Lift), lbs (kg) ...................... 1450 (660)
Breakout Force (Tilt), lbs (kg) ...................... 2025 (920)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Wheelbase (Nominal), in (mm) ...................... 28.4 (720)
Height (Operator Cab), in (mm) ...................... 71.4 (1815)
Height (Boom Raised), in (mm) ...................... 123.3 (3130)
Length (w/o Bucket), in (mm) ...................... 75.5 (1920)
Length (Bucket On Ground), in (mm) ...................... 100.5 (2555)
Width (w/o Bucket), in (mm) ...................... 35.4 (900)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 94.5 (2400)
Dump Angle At Max Height, deg ...................... 36
Dump Height (Fully Raised), in (mm) ...................... 74.5 (1890)
Dump Reach At Max Height, in (mm) ...................... 18.5 (470)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 25
Bucket Width (Std), in (mm) ...................... 36 (915)
Bucket Width (Opt), in (mm) ...................... 44 (1115)
Ground Clearance, in (mm) ...................... 5.5 (140)
Turning Radius (Front w/Bucket), in (mm) ...................... 61.9 (1575)
Operating Weight, lbs (kg) ...................... 2710 (1230)

____________________________________________________________________________________

SKID STEER LOADERS SPECIFICATIONS