____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat 453 |
Bobcat 453 Specifications
The
Bobcat 453 skid steer loader is powered by 43.9 cubic inches (0.7L) Kubota
D722-B vertical 3-cylinder indirect injection water-cooled diesel engine with a
rated power of 18.8 hp (14 kW) at 3600 rpm. The Bobcat 453 is equipped with a
radial-lift loader boom, 1-speed hydrostatic transmission, 60H drive chains, and
5.70x12 standard tires. The hydraulic system has a pump with fluid flow rate of
6.8 gpm (25.7 lpm). The hydraulic pressure is 1450 psi (100 bar). The skid steer
loader has a rated operating capacity of 700 lbs (318 kg) and tipping load of
1430 lbs (650 kg). The lift height is 92.4 inches (2350 mm) to hinge pin, and
dump height is 71.2 inches (1810 mm).
| Engine Specs |
Engine Model ...................... Kubota D722-B
Engine Type ...................... 4-cycle vertical in-line IDI water-cooled diesel
Number of Cylinders ...................... 3
Total Displacement, cu.in (L) ...................... 43.9 (0.72)
Cylinder Bore, in (mm) ...................... 2.64 (67.0)
Piston Stroke, in (mm) ...................... 2.68 (68.0)
Rated Engine Power, hp (kW) ...................... 18.8 (14.0)
Rated Engine Speed, rpm ...................... 3600
Idling Speed, rpm ...................... 900-1000
Aspiration Type ...................... Naturally aspirated
Compression Ratio ...................... 23.5:1
Firing Order ...................... 1-2-3
Fuel System ...................... Indirect injection
Fuel Injection Pump ...................... Mechanical
Injection Nozzle ...................... Bosch throttle type
Governor Type ...................... Mechanical
Lubricating System ...................... Forced with trochoid pump
Oil Filter Type ...................... Full flow paper element
Starting System ...................... Electric starting with starter
Fuel Tank Capacity, gal (L) ...................... 6.5 (24.7)
Engine Oil Capacity, qts (L) ...................... 4.0 (3.8)
Coolant Capacity, qts (L) ...................... 3.1 (3.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 35
| Drive Train |
Drive System Type ...................... Hydrostatic, 4-wheel drive
Number of Gears ...................... Single
Chain Drive Type ...................... 60H roller chain
Front Tire Size ...................... 5.70x12
Rear Tire Size ...................... 5.70x12
Maximum Speed, mph (km/h) ...................... 5.2 (8.4)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 6.8 (25.7)
System Pressure, Bar (psi) ...................... 100 (1450)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 700 (318)
Tipping Load, lbs (kg) ...................... 1430 (650)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 28.4 (720)
Height (Operator Cab), in (mm) ...................... 71.5 (1815)
Height (Boom Raised), in (mm) ...................... 120 (3050)
Length (w/o Bucket), in (mm) ...................... 73.1 (1860)
Length (Bucket On Ground), in (mm) ...................... 97.2 (2470)
Width (w/o Bucket), in (mm) ...................... 34.8 (885)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 92.4 (2350)
Dump Angle At Max Height, deg ...................... 34
Dump Height (Fully Raised), in (mm) ...................... 71.2 (1810)
Dump Reach At Max Height, in (mm) ...................... 15 (380)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 99
Departure Angle, deg ...................... 26
Bucket Width (Std), in (mm) ...................... 36 (915)
Bucket Width (Opt), in (mm) ...................... 44 (1115)
Ground Clearance, in (mm) ...................... 5.9 (150)
Turning Radius (Front w/Bucket), in (mm) ...................... 56.4 (1430)
Operating Weight, lbs (kg) ...................... 2500 (1135)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |