Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat M444 |
Bobcat M444 Specifications
The Bobcat M444 skid steer loader is powered by 49.8 cu.in (0.8L) Onan Super CCK 4-cycle 2-cylinder air-cooled gasoline engine with a rated power of 15.5 hp (11.5 kW) at 3000 rpm. The Bobcat M444 is equipped with a radial-lift loader boom, variable sheave transmission, 60H drive chains, and 7.00x15 standard tires. The hydraulic system has a pump with fluid flow rate of 7.5 gpm (28.4 lpm). The hydraulic pressure is 1700 psi (117 bar). The skid steer loader has a rated operating capacity of 1000 lbs (454 kg) and tipping load of 2000 lbs (910 kg). The lift height is 108 inches (2745 mm) to hinge pin, and dump height is 86 inches (2185 mm).
Engine Specs |
Engine Model ...................... Onan Super CCK
Engine Type ...................... 4-cycle 2-cylinder air-cooled gasoline engine
Number of Cylinders ...................... Two
Cylinder Bore, in (mm) ...................... 3.25 (82.6)
Piston Stroke, in (mm) ...................... 3.00 (76.2)
Displacement, cu.in (cm3) ...................... 49.8 (0.82)
Maximum Power, Hp (kW) ...................... 15.5 (11.5)
Maximum Speed, rpm ...................... 3000
Maximum Torque, Nm (lb-ft) ...................... 39.2 (29)
Torque Speed, rpm ...................... 1800
Fuel System ...................... Carburetor
Carburetor Type ...................... Downdraft
Fuel Pump Type ...................... Mechanical
Air Cleaner Type ...................... Dry element
Governor Type ...................... Mechanical flyball
Lubricating System ...................... Full pressure with filter
Cooling System ...................... Pressure air cooled
Ignition System ...................... Distributor
Starting System ...................... Electric start
Fuel Tank Capacity, gal (L) ...................... 12.4 (47.0)
Engine Oil Capacity, qts (L) ...................... 3.0 (2.8)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Generator
Generator Rating, Amps ...................... 30
Drive Train |
Drive System Type ...................... Variable Speed Sheave
Clutch Type ...................... 4 Single discs
Chain Drive Type ...................... 60H roller chain
Front Tire Size ...................... 7.00x15
Rear Tire Size ...................... 7.00x15
Maximum Speed, mph (km/h) ...................... 5.7 (9.1)
Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 7.5 (28.4)
System Pressure, Bar (psi) ...................... 117 (1700)
Hydraulic Reservoir Capacity, gal (L) ...................... 17.0 (64.4)
Hydraulic System Capacity, gal (L) ...................... 20.0 (75.8)
Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1000 (454)
Tipping Load, lbs (kg) ...................... 2000 (910)
Loader Boom Type .................... Radial-lift
Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 35 (890)
Height (Operator ROPS), in (mm) ...................... 60 (1525)
Height (Boom Raised), in (mm) ...................... 138 (3505)
Length (w/o Bucket), in (mm) ...................... 79 (2005)
Length (Bucket On Ground), in (mm) ...................... 107 (2720)
Width (w/o Bucket), in (mm) ...................... 46 (1170)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 108 (2745)
Dump Angle At Max Height, deg ...................... 38
Dump Height (Fully Raised), in (mm) ...................... 86 (2185)
Dump Reach At Max Height, in (mm) ...................... 17.8 (450)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 27
Bucket Width, in (mm) ...................... 54 (1370)
Ground Clearance, in (mm) ...................... 8.0 (205)
Turning Radius (Front w/Bucket), in (mm) ...................... 65 (1650)
Turning Radius (Front w/o Bucket), in (mm) ...................... 41.5 (1055)
Turning Radius (Rear), in (mm) ...................... 48 (1220)
Shipping Weight, lbs (kg) ...................... 2940 (1340)
Operating Weight, lbs (kg) ...................... 3405 (1550)
____________________________________________________________________________________
SKID STEER LOADERS SPECIFICATIONS |