____________________________________________________________________________________
| Home / Skid Steer Loaders / Bobcat Skid Steer Loaders / Bobcat M371 |
Bobcat M371 Specifications
The
Bobcat M371 skid steer loader driveline system components: a 31.3 cu.in (0.5L)
Kohler K321S L-head single-cylinder air-cooled gasoline engine with a rated
power of 13 hp (9.6 kW), and 2-speed V-belt transmission. The hydraulic system
has a pump with a rated capacity of 5 gal/min (19 l/min). The system relief
pressure is 1200 psi (83 bar). The Bobcat M371 is equipped with a radial-lift
loader boom, 60H drive chains, and 5.70x12 or 23x8.50x12 tires. The skid steer
loader has a max lift height of 89" (2260 mm) to hinge pin and dump height
of 71" (1805 mm). The rated operating capacity is 500 lbs (227 kg), and tipping
load is 900 lbs (410 kg).
| Engine Specs |
Engine Model ...................... Kohler K321S
Engine Type ...................... 4-cycle L-head single-cylinder air-cooled gasoline
Number of Cylinders ...................... 1
Total Displacement, cu.in (L) ...................... 31.3 (0.51)
Cylinder Bore, in (mm) ...................... 3.50 (88.9)
Piston Stroke, in (mm) ...................... 3.25 (82.6)
Rated Engine Power, hp (kW) ...................... 13.0 (9.6)
Rated Engine Speed, rpm ...................... 3000
Maximum Torque, Nm (lb-ft) ...................... 31.5 (23.3)
Torque Speed, rpm ...................... 2200
Fuel System ...................... Carburetor
Lubricating System ...................... Splash type
Air Cleaner Type ...................... Dry replaceable element
Cooling System ...................... Air-cooled
Ignition System ...................... Magneto or battery
Spark Plug Gap, in (mm) ...................... 0.026 (0.65)
Intake Valve Clearance, in (mm) ...................... 0.008-0.010 (0.20-0.25)
Exhaust Valve Clearance, in (mm) ...................... 0.017-0.019 (0.43-0.48)
Fuel Tank Capacity, gal (L) ...................... 5.5 (20.8)
Engine Oil Capacity, qts (L) ...................... 2.0 (1.9)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 15
| Drive Train |
Drive System Type ...................... V-belt transmission
Clutch Type ...................... 4 Single discs
Number of Gears ...................... Two (High-low)
Chain Drive Type ...................... 60H roller chain
Front Tire Size (Std) ...................... 5.70x12
Rear Tire Size (Std) ...................... 5.70x12
Front Tire Size (Opt) ...................... 23x8.50x12
Rear Tire Size (Opt) ...................... 23x8.50x12
Maximum Speed (Low), mph (km/h) ...................... 2.1 (3.4)
Maximum Speed (High), mph (km/h) ...................... 3.7 (5.9)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 5.0 (19.0)
System Pressure, Bar (psi) ...................... 83 (1200)
Hydraulic Reservoir Capacity, gal (L) ...................... 7.0 (26.5)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 500 (227)
Tipping Load, lbs (kg) ...................... 900 (410)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Wheelbase (Nominal), in (mm) ...................... 28 (710)
Height (Operator Cab), in (mm) ...................... 72 (1830)
Height (Boom Raised), in (mm) ...................... 116 (2945)
Length (w/o Bucket), in (mm) ...................... 69 (1750)
Length (Bucket On Ground), in (mm) ...................... 92 (2335)
Width (w/o Bucket), in (mm) ...................... 28 (710)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 89 (2260)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 71 (1805)
Dump Reach At Max Height, in (mm) ...................... 13 (330)
Rollback Angle At Ground Level, deg ...................... 24
Rollback Angle At Max Height, deg ...................... 95
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 36 (915)
Ground Clearance, in (mm) ...................... 4.8 (122)
Turning Radius (Front w/Bucket), in (mm) ...................... 54 (1370)
Turning Radius (Front w/o Bucket), in (mm) ...................... 30 (760)
Turning Radius (Rear), in (mm) ...................... 42 (1065)
Shipping Weight, lbs (kg) ...................... 1600 (730)
Operating Weight, lbs (kg) ...................... 1900 (865)
____________________________________________________________________________________
____________________________________________________________________________________
| SKID STEER LOADERS SPECIFICATIONS |