____________________________________________________________________________________
| Home / Compact Track Loaders / New Holland Compact Track Loaders / New Holland C238 |
New Holland C238 Specifications
The
New Holland C238 compact track loader is powered by 207 cu.in (3.4 L) FPT F5B
FL413E 4-cylinder turbocharged liquid-cooled diesel engine with a rated power of
84 hp (62 kW) at 2500 rpm. The New Holland C238 is equipped with a two-speed
hydrostatic transmission, hydraulic disc brakes, and steel-embedded rubber
tracks. The hydraulic system has a pump with fluid flow rate of 24.2 gpm (91.5
lpm). The hydraulic pressure is 3050 psi (210 bar). The compact track loader has
a rated operating capacity of 2660 lbs (1210 kg) and tipping load of 7600 lbs
(3445 kg). The lift height is 131.1 inches (3330 mm) to hinge pin, and dump
height is 104.5 inches (2655 mm).
| Engine Specs |
Engine Model ...................... FPT F5B FL413E
Engine Type ...................... 4-cycle liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 207 (3.39)
Cylinder Bore, in (mm) ...................... 3.89 (99.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged aftercooled
Rated Engine Power, hp (kW) ...................... 84.0 (62.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 383 (282)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2600-2750
Low Idle Speed, rpm ...................... 1000-1150
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Injection ...................... High pressure common rail
Emission Level ...................... Tier 4 interim, stage 4B
Fuel Tank Capacity, gal (L) ...................... 25.5 (96.5)
Oil Capacity, qts (L) ...................... 10.1 (9.5)
Coolant Capacity, qts (L) ...................... 20.1 (19.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 120
| Drive Train |
Drive System Type ...................... Hydrostatic with electro-hydraulic control
Number of Gears ...................... Two (low/high)
Pump Displacement, cu.in (cc) ...................... 2.75 (45)
Charge Pressure, Bar (psi) ...................... 24.5 (362)
Planetary Gearbox Capacity (Each), qts (L) ...................... 1.06 (1.0)
Forward Speed (Low range), mph (kph) ...................... 5.1 (8.2)
Reverse Speed (Low range), mph (kph) ...................... 5.1 (8.2)
Forward Speed (High range), mph (kph) ...................... 7.6 (12.2)
Reverse Speed (High range), mph (kph) ...................... 7.6 (12.2)
| Undercarriage |
System Type ...................... S-Wave Pattern
Track Type ...................... Steel-embedded rubber track
Track Width, in (mm) ...................... 17.7 (450)
Track Rollers (per Side) ...................... 4 triple flange lower rollers
Track Idlers (per Side) ...................... 2 single flange front and rear idlers
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 24.2 (91.5)
Pump Flow (Opt), gpm (Lpm) ...................... 37.6 (145.5)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.0 (15.0)
Hydraulic System Capacity, gal (L) ...................... 12.0 (45.5)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity (50%), lbs (kg) ...................... 3800 (1725)
Rated Operating Capacity (35%), lbs (kg) ...................... 2660 (1210)
Tipping Load, lbs (kg) ...................... 7600 (3445)
Boom Lifting Force, lbs (kg) ...................... 6110 (2775)
Bucket Breakout Force, lbs (kg) ...................... 7360 (3345)
| Dimensions and Weight |
Operating Height, in (mm) ...................... 161.3 (4095)
Height (Operator Cab), in (mm) ...................... 80.4 (2045)
Length (w/o Bucket), in (mm) ...................... 118.9 (3020)
Length (Bucket On Ground), in (mm) ...................... 144 (3660)
Length (Ground Contact), in (mm) ...................... 64.5 (1640)
Width (w/o Bucket), in (mm) ...................... 76 (1930)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 131.1 (3330)
Dump Angle At Max Height, deg ...................... 55
Dump Height (Fully Raised), in (mm) ...................... 104.5 (2655)
Dump Reach At Max Height, in (mm) ...................... 34.4 (875)
Rollback Angle At Ground Level, deg ...................... 33
Rollback Angle At Max Height, deg ...................... 85
Departure Angle, deg ...................... 32
Bucket Width, in (mm) ...................... 78 (1980)
Ground Clearance, in (mm) ...................... 9.5 (245)
Turning Radius (w/Bucket), in (mm) ...................... 87.6 (2225)
Shipping Weight, lbs (kg) ...................... 9765 (4430)
Operating Weight, lbs (kg) ...................... 10100 (4580)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |