____________________________________________________________________________________
| Home / Compact Track Loaders / New Holland Compact Track Loaders / New Holland C190 |
New Holland C190 Specifications
The
New Holland C190 compact track loader driveline system components: a 274 cu.in
(4.5L) FPT F4G E9454 four-cylinder direct injection turbocharged diesel engine
with a rated power of 83 hp (62 kW), and 2-speed hydrostatic transmission. The
hydraulic system has a pump with a rated capacity of 21.9 gal/min (83 l/min).
The system pressure is 3050 psi (210 bar). The New Holland C190 is equipped with
hydraulic disc brakes and steel-embedded rubber tracks. The compact track loader
has a lift height of 127.4" (3235 mm) to hinge pin and dump height of 102.6"
(2605 mm). The rated operating capacity is 2900 lbs (1315 kg), and tipping load
is 8285 lbs (3760 kg).
| Engine Specs |
Engine Model ...................... FPT F4G E9454
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 274 (4.48)
Cylinder Bore, in (mm) ...................... 4.09 (104.0)
Piston Stroke, in (mm) ...................... 5.20 (132.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 83.0 (62.0)
Rated Engine Speed, rpm ...................... 2300
Maximum Torque, Nm (lb-ft) ...................... 390 (288)
Torque Speed, rpm ...................... 1300
Fast Idle Speed, rpm ...................... 2355-2475
Low Idle Speed, rpm ...................... 1000-1150
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Tank Capacity, gal (L) ...................... 26.5 (100.0)
Oil Capacity, qts (L) ...................... 11.7 (11.0)
Coolant Capacity, qts (L) ...................... 18.4 (17.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic with mechanical or pilot control
Number of Gears ...................... Two (low/high)
Drive Pump Type ...................... Piston
Drive Motor Type ...................... Radial piston
Planetary Gearbox Capacity (Each), qts (L) ...................... 0.64 (0.60)
Forward Speed (Low range), mph (kph) ...................... 5.1 (8.2)
Reverse Speed (Low range), mph (kph) ...................... 5.1 (8.2)
Forward Speed (High range), mph (kph) ...................... 8.1 (12.9)
Reverse Speed (High range), mph (kph) ...................... 8.1 (12.9)
| Undercarriage |
System Type ...................... High drive offset tread pattern
Track Type ...................... Steel-embedded rubber track
Track Width (Std), in (mm) ...................... 17.7 (450)
Track Width (Opt), in (mm) ...................... 15.7 (400)
Track Rollers (per Side) ...................... 3 triple flange crawler-style rollers
Track Idlers (per Side) ...................... 2 single flange front and rear idlers
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 21.9 (83.0)
Pump Flow (Opt), gpm (Lpm) ...................... 37.3 (141.4)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ...................... 5.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity (50%), lbs (kg) ...................... 4145 (1880)
Rated Operating Capacity (35%), lbs (kg) ...................... 2900 (1315)
Tipping Load, lbs (kg) ...................... 8285 (3760)
Boom Lifting Force, lbs (kg) ...................... 6230 (2825)
Bucket Breakout Force, lbs (kg) ...................... 7670 (3480)
| Dimensions and Weight |
Operating Height, in (mm) ...................... 152.7 (3875)
Height (Operator Cab), in (mm) ...................... 80.1 (2035)
Length (w/o Bucket), in (mm) ...................... 122 (3100)
Length (Bucket On Ground), in (mm) ...................... 148.2 (3765)
Length (Ground Contact), in (mm) ...................... 64.7 (1645)
Width (w/o Bucket), in (mm) ...................... 82.6 (2095)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 127.4 (3235)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 102.6 (2605)
Dump Reach At Max Height, in (mm) ...................... 34.4 (875)
Rollback Angle At Ground Level, deg ...................... 39
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 84 (2130)
Ground Clearance, in (mm) ...................... 10.4 (265)
Turning Radius (w/Bucket), in (mm) ...................... 80.5 (2045)
Operating Weight, lbs (kg) ...................... 9820 (4455)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |