____________________________________________________________________________________
| Home / Compact Track Loaders / Bobcat Compact Track Loaders / Bobcat T590 |
Bobcat T590 Specifications
The
Bobcat T590 compact track loader is powered by 158.7 cu.in (2.6L) Kubota
V2607-DI-TE3-B 4-cylinder turbocharged liquid-cooled diesel engine with a rated
power of 61 hp (45.5 kW). The Bobcat T590 is equipped with a single-speed or
two-speed hydrostatic transmission, hydraulic disc brakes, and rubber tracks
with steel inserts. The hydraulic system has a pump with fluid flow rate of 17.1
gpm (64.7 lpm). The hydraulic pressure is 3550 psi (245 bar). The compact track
loader has a rated operating capacity of 2110 lbs (955 kg) and tipping load of
6025 lbs (2730 kg). The boom lifting force is 4755 lbs (2155 kg), and bucket
breakout force is 4490 lbs (2035 kg).
| Engine Specs |
Engine Model ...................... Kubota V2607-DI-TE3B
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 158.7 (2.59)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 61.0 (45.5)
Rated Engine Speed, rpm ...................... 2700
Maximum Torque, Nm (lb-ft) ...................... 211 (155.6)
Torque Speed, rpm ...................... 1425
Idle Speed, rpm ...................... 1175-2900
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) ...................... 36.5 (138.2)
Oil Capacity, qts (L) ...................... 9.7 (10.3)
Coolant Capacity, qts (L) ...................... 12.1 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90
| Drive Train |
Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.39 (0.37)
Maximum Speed (Std), mph (kph) ...................... 7.1 (11.4)
Maximum Speed (Opt), mph (kph) ...................... 10.4 (16.7)
| Undercarriage |
Tracks Type ...................... Rubber with steel inserts
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 12.6 (320)
Track Width (Opt), in (mm) ...................... 15.8 (400)
Ground Pressure (Roller Undercarriage), Bar (psi) ...................... 0.35 (5.1)
Ground Pressure (Solid-Mounted Undercarriage), Bar (psi) ...................... 0.34 (5.0)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 17.1 (64.7)
Pump Flow (Opt), gpm (Lpm) ...................... 26.7 (101.1)
System Pressure, Bar (psi) ...................... 238-245 (3450-3550)
Hydraulic Reservoir Capacity, qts (L) ...................... 8.1 (7.6)
Hydraulic System Capacity, gal (L) ...................... 9.5 (36.0)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity (Roller Undercarriage), lbs (kg) ...................... 2110 (955)
Rated Operating Capacity (Solid-Mounted Undercarriage), lbs (kg) ...................... 2185 (990)
Tipping Load (Roller Undercarriage), lbs (kg) ...................... 6025 (2730)
Tipping Load (Solid-Mounted Undercarriage), lbs (kg) ...................... 6250 (2835)
Boom Lifting Force (Roller Undercarriage), lbs (kg) ...................... 4755 (2155)
Boom Lifting Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 4555 (2065)
Bucket Breakout Force (Roller Undercarriage), lbs (kg) ...................... 4490 (2035)
Bucket Breakout Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 4710 (2135)
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 104.6 (2655)
Length (Bucket On Ground), in (mm) ...................... 133 (3375)
Length (Ground Contact), in (mm) ...................... 54.1 (1375)
Width (w/o Bucket), in (mm) ...................... 67 (1700)
Operating Height, in (mm) ...................... 153.6 (3900)
Height (Operator Cab), in (mm) ...................... 77.8 (1970)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119 (3020)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 91.3 (2320)
Dump Reach At Max Height, in (mm) ...................... 34.9 (885)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.4 (190)
Turning Radius (w/Bucket), in (mm) ...................... 80 (2030)
Operating Weight (Roller Undercarriage), lbs (kg) ...................... 7895 (3580)
Operating Weight (Solid-Mounted Undercarriage), lbs (kg) ...................... 7745 (3515)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |