____________________________________________________________________________________
| Home / Compact Track Loaders / Gehl Compact Track Loaders / Gehl CTL65 |
Gehl CTL65 Specifications
The
Gehl CTL65 compact track loader driveline system components: a 202.5 cu.in
(3.3L) Yanmar 4TNV98-ZNTBL 4-cycle 4-cylinder liquid-cooled naturally aspirated
diesel engine with a rated power of 67.1 hp (50.1 kW), and hydrostatic two-speed
transmission. The hydraulic system has a pump with a rated flow of 18.4 gpm
(69.7 lpm). The system pressure is 2990 psi (206 bar). The Gehl CTL65 is
equipped with wet multi disc brakes, planetary final drives, and rubber tracks.
The loader has a lift height of 119.3" (3030 mm) to hinge pin and dump height of
93.4" (2370 mm). The rated operating capacity is 1620 lbs (735 kg), and tipping
load is 4630 lbs (2100 kg).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98-ZNTBL
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 67.1 (50.1)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 181.2 (244.1)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry, replaceable dual element
Valve Clearance, in (mm) ...................... 0.006-0.010 (0.15-0.25)
Fuel Tank Capacity, gal (L) ...................... 19.8 (75.0)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 17.4 (16.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... 2 (low/high)
Drive Motor Type ...................... Axial-piston
Brakes Type ...................... Wet multi disc
Final Drive Capacity, qts (L) ...................... 1.1 (1.0)
Forward Speed (Low range), mph (kph) ...................... 4.5 (7.3)
Reverse Speed (Low range), mph (kph) ...................... 4.5 (7.3)
Forward Speed (High range), mph (kph) ...................... 6.8 (10.9)
Reverse Speed (High range), mph (kph) ...................... 6.8 (10.9)
| Undercarriage |
Tracks Type ...................... High-strength rubber and steel reinforcement
Track Width, in (mm) ...................... 12.6 (320)
Track Rollers Type ...................... Steel rollers
Number of Rollers on Each Side ...................... 4
Ground Pressure, Bar (psi) ...................... 0.34 (4.85)
Drawbar Pull, lbf (kN) ...................... 9918 (40.5)
| Hydraulic System |
Hydraulic System Type ...................... Tandem gear pump
Pump Flow, gpm (Lpm) ...................... 18.4 (69.7)
System Pressure, Bar (psi) ...................... 206 (2990)
Hydraulic Reservoir Capacity, gal (L) ...................... 10.2 (38.6)
Hydraulic System Capacity, gal (L) ...................... 15.3 (58.0)
| Loader Performance |
Rated Operating Capacity, lbs (kg) ...................... 1620 (735)
Tipping Load, lbs (kg) ...................... 4630 (2100)
Bucket Breakout Force, lbs (kg) ...................... 6725 (3057)
Lift Arm Breakout Force, lbs (kg) ...................... 6710 (3050)
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 109 (2755)
Length (Bucket On Ground), in (mm) ...................... 140 (3545)
Length (Ground Contact), in (mm) ...................... 55 (1390)
Height (Operator Cab), in (mm) ...................... 84 (2125)
Width (w/o Bucket), in (mm) ...................... 62.2 (1580)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119.3 (3030)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 93.4 (2370)
Dump Reach At Max Height, in (mm) ...................... 28.8 (730)
Rollback Angle At Ground Level, deg ...................... 35
Departure Angle, deg ...................... 26
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 12.1 (310)
Turning Radius (w/Bucket), in (mm) ...................... 93 (2360)
Operating Weight, lbs (kg) ...................... 8015 (3635)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |