____________________________________________________________________________________
| Home / Compact Track Loaders / Gehl Compact Track Loaders / Gehl RT210 |
Gehl RT210 Specifications
The
Gehl RT210 compact track loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98CT
4-cylinder turbocharged diesel engine with a rated power of 72 hp (53.7 kW) at
2500 rpm. The Gehl RT210 is equipped with a two-speed transmission, radial-lift
loader boom, automatic track tension system, undercarriage with 5 steel rollers
and rubber tracks. The hydraulic system has a pump with fluid flow rate of 21.8
gpm (82.5 lpm). The hydraulic pressure is 3000 psi (207 bar). The track loader
has a rated operating capacity of 2100 lbs (953 kg) and tipping load of 6000 lbs
(2720 kg). The boom lifting force is 6481 lbs (2940 kg), and bucket breakout
force is 6631 lbs (3008 kg).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98CT
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 72.0 (53.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 294 (217)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 24.0 (91.0)
Engine Oil Capacity, qts (L) ...................... 11.0 (10.4)
Cooling System Capacity, qts (L) ...................... 15.2 (14.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic, rubber track drive
Number of Gears ...................... 2 (low/high)
Drive Motor Type ...................... Axial-piston with planetary gearbox reduction
Brakes Type ...................... Hydraulic disc
Motor Gearbox Capacity, qts (L) ...................... 1.1 (1.0)
Forward Speed (Low range), mph (kph) ...................... 5.4 (8.7)
Forward Speed (High range), mph (kph) ...................... 7.9 (12.7)
Reverse Speed (Low range), mph (kph) ...................... 5.4 (8.7)
Reverse Speed (High range), mph (kph) ...................... 7.9 (12.7)
| Undercarriage |
Tracks Type ...................... Rubber and steel reinforcement
Track Tension System ...................... Automatic
Track Width, in (mm) ...................... 17.7 (450)
Ground Pressure, Bar (psi) ...................... 0.324 (4.7)
Tractive Effort, lbs (kg) ...................... 12360 (5605)
Drive Sprockets Type ...................... 17-tooth, forged
Track Rollers Type ...................... Steel rollers
Number of Rollers on Each Side ...................... 5
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Axial-piston pump
Pump Capacity (Standard), gpm (Lpm) ...................... 21.8 (82.5)
Pump Capacity (High Flow), gpm (Lpm) ...................... 35.9 (135.8)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Tank Capacity, gal (L) ...................... 13.8 (52.2)
Hydraulic System Capacity, gal (L) ...................... 21.5 (81.4)
| Loader Performance |
Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 2100 (953)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 3000 (1360)
Tipping Load, lbs (kg) ...................... 6000 (2720)
Bucket Breakout Force, lbs (kg) ...................... 6631 (3008)
Lift Arm Breakout Force, lbs (kg) ...................... 6481 (2940)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 114.5 (2910)
Length (Bucket On Ground), in (mm) ...................... 152.3 (3870)
Length (Ground Contact), in (mm) ...................... 58.4 (1485)
Height (Boom Raised), in (mm) ...................... 172 (4370)
Height (Carry Position), in (mm) ...................... 7 (178)
Height (Operator Cab), in (mm) ...................... 83.1 (2110)
Width (w/o Bucket), in (mm) ...................... 69.5 (1765)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 128 (3250)
Dump Angle At Max Height, deg ...................... 39
Dump Height (Fully Raised), in (mm) ...................... 95.7 (2430)
Dump Reach At Max Height, in (mm) ...................... 37 (940)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 102
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 13 (330)
Turning Radius (w/Bucket), in (mm) ...................... 98.1 (2490)
Shipping Weight, lbs (kg) ...................... 8880 (4030)
Operating Weight, lbs (kg) ...................... 9890 (4485)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |