____________________________________________________________________________________
| Home / Compact Track Loaders / New Holland Compact Track Loaders / New Holland C185 |
New Holland C185 Specifications
The
New Holland C185 compact track loader is powered by 195 cu.in (3.2L) FPT F5C
E5454 four-cylinder turbocharged liquid-cooled diesel engine with a rated power
of 77 hp (57 kW) at 2500 rpm. The New Holland C185 is equipped with a two-speed
hydrostatic transmission, hydraulic disc brakes, and steel-embedded rubber
tracks. The hydraulic system has a pump with fluid flow rate of 21 gpm (79.6
lpm). The hydraulic pressure is 3050 psi (210 bar). The compact track loader has
a rated operating capacity of 2550 lbs (1155 kg) and tipping load of 7290 lbs
(3300 kg). The lift height is 128.3 inches (3255 mm) to hinge pin, and dump
height is 103.4 inches (2625 mm).
| Engine Specs |
Engine Model ...................... FPT F5C E5454
Engine Type ...................... 4-cycle 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 195 (3.19)
Cylinder Bore, in (mm) ...................... 3.89 (99.0)
Piston Stroke, in (mm) ...................... 4.09 (104.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 77.0 (57.0)
Rated Engine Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 310 (229)
Torque Speed, rpm ...................... 1400
Fast Idle Speed, rpm ...................... 2600-2750
Low Idle Speed, rpm ...................... 1075-1175
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Tank Capacity, gal (L) ...................... 22.9 (86.7)
Oil Capacity, qts (L) ...................... 9.0 (8.5)
Coolant Capacity, qts (L) ...................... 12.1 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95
| Drive Train |
Drive System Type ...................... Hydrostatic with mechanical or pilot control
Number of Gears ...................... Two (low/high)
Drive Pump Type ...................... Piston
Drive Motor Type ...................... Radial piston
Planetary Gearbox Capacity (Each), qts (L) ...................... 0.64 (0.60)
Forward Speed (Low range), mph (kph) ...................... 5.4 (8.7)
Reverse Speed (Low range), mph (kph) ...................... 5.4 (8.7)
Forward Speed (High range), mph (kph) ...................... 8.6 (13.8)
Reverse Speed (High range), mph (kph) ...................... 8.6 (13.8)
| Undercarriage |
System Type ...................... High drive offset tread pattern
Track Type ...................... Steel-embedded rubber track
Track Width (Std), in (mm) ...................... 17.7 (450)
Track Width (Opt), in (mm) ...................... 15.7 (400)
Track Rollers (per Side) ...................... 3 triple flange crawler-style rollers
Track Idlers (per Side) ...................... 2 single flange front and rear idlers
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 21.0 (79.6)
Pump Flow (Opt), gpm (Lpm) ...................... 35.8 (135.7)
System Pressure, Bar (psi) ...................... 210 (3050)
Hydraulic Reservoir Capacity, gal (L) ...................... 5.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 15.0 (56.8)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity (50%), lbs (kg) ...................... 3645 (1650)
Rated Operating Capacity (35%), lbs (kg) ...................... 2550 (1155)
Tipping Load, lbs (kg) ...................... 7290 (3300)
Boom Lifting Force, lbs (kg) ...................... 4835 (2195)
Bucket Breakout Force, lbs (kg) ...................... 7670 (3480)
| Dimensions and Weight |
Operating Height, in (mm) ...................... 152 (3860)
Height (Operator Cab), in (mm) ...................... 80.1 (2035)
Length (w/o Bucket), in (mm) ...................... 116 (2945)
Length (Bucket On Ground), in (mm) ...................... 141.2 (3,587)
Length (Ground Contact), in (mm) ...................... 64.7 (1645)
Width (w/o Bucket), in (mm) ...................... 82.6 (2095)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 128.3 (3255)
Dump Angle At Max Height, deg ...................... 45
Dump Height (Fully Raised), in (mm) ...................... 103.4 (2625)
Dump Reach At Max Height, in (mm) ...................... 33.1 (840)
Rollback Angle At Ground Level, deg ...................... 36
Rollback Angle At Max Height, deg ...................... 76
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 84 (2130)
Ground Clearance, in (mm) ...................... 10.4 (265)
Turning Radius (w/Bucket), in (mm) ...................... 79.5 (2020)
Operating Weight, lbs (kg) ...................... 9100 (4130)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |