____________________________________________________________________________________
| Home / Compact Track Loaders / Gehl Compact Track Loaders / Gehl RT165 |
Gehl RT165 Specifications
The
Gehl RT165 compact track loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98C
4-cylinder liquid-cooled diesel engine with a rated power of 69.3 hp (51.7 kW)
at 2500 rpm. The Gehl RT165 is equipped with a 2-speed hydrostatic transmission,
radial-lift loader boom, 17-tooth drive sprockets, and undercarriage with 12.6"
(320 mm) rubber tracks. The hydraulic system has a pump with fluid flow rate of
18.7 gpm (71 lpm). The hydraulic pressure is 3000 psi (207 bar). The track
loader has a rated operating capacity of 1650 lbs (748 kg) and tipping load of
4714 lbs (2138 kg). The lift height is 119.6" (3040 mm) to hinge pin, and
dump height is 91.7" (2330 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98C
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 69.3 (51.7)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 241 (178)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 16.5 (62.5)
Engine Oil Capacity, qts (L) ...................... 9.5 (9.0)
Cooling System Capacity, qts (L) ...................... 13.7 (13.0)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 100
| Drive Train |
Drive System Type ...................... Servo-controlled hydrostatic track drive
Number of Gears ...................... 2 (low/high)
Drive Motor Type ...................... Axial-piston
Brakes Type ...................... Wet multi disc
Forward Speed (Low range), mph (kph) ...................... 6.5 (10.4)
Forward Speed (High range), mph (kph) ...................... 10.0 (16.0)
Reverse Speed (Low range), mph (kph) ...................... 6.5 (10.4)
Reverse Speed (High range), mph (kph) ...................... 10.0 (16.0)
| Undercarriage |
Tracks Type ...................... Rubber and steel reinforcement
Track Tension System ...................... Automatic
Track Width, in (mm) ...................... 12.6 (320)
Ground Pressure, Bar (psi) ...................... 0.448 (6.5)
Tractive Effort, lbs (kg) ...................... 9578 (4345)
Drive Sprockets Type ...................... 17-tooth, forged
Track Rollers Type ...................... Steel rollers
Number of Rollers on Each Side ...................... 3
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Radial-piston pump
Pump Capacity (Standard), gpm (Lpm) ...................... 18.7 (71.0)
Pump Capacity (High Flow), gpm (Lpm) ...................... 30.1 (114.0)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Tank Capacity, gal (L) ...................... 10.2 (39.0)
| Loader Performance |
Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 1650 (748)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 2357 (1069)
Tipping Load, lbs (kg) ...................... 4714 (2138)
Bucket Breakout Force, lbs (kg) ...................... 4230 (1920)
Lift Arm Breakout Force, lbs (kg) ...................... 5060 (2295)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 94.2 (2395)
Length (Bucket On Ground), in (mm) ...................... 126.2 (3205)
Length (Ground Contact), in (mm) ...................... 49.8 (1265)
Height (Boom Raised), in (mm) ...................... 157.8 (4010)
Height (Carry Position), in (mm) ...................... 7.8 (200)
Height (Operator Cab), in (mm) ...................... 77.5 (1970)
Width (w/o Bucket), in (mm) ...................... 65 (1650)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119.6 (3040)
Dump Angle At Max Height, deg ...................... 39
Dump Height (Fully Raised), in (mm) ...................... 91.7 (2330)
Dump Reach At Max Height, in (mm) ...................... 25.3 (640)
Rollback Angle At Ground Level, deg ...................... 28
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 28
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 7.3 (185)
Turning Radius (w/Bucket), in (mm) ...................... 77.9 (1980)
Operating Weight, lbs (kg) ...................... 8020 (3640)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |