____________________________________________________________________________________
| Home / Compact Track Loaders / Gehl Compact Track Loaders / Gehl CTL60 |
Gehl CTL60 Specifications
The
Gehl CTL60 compact track loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98
vertical in-line 4-cylinder liquid-cooled diesel engine with a rated power of 67
hp (49.3 kW) at 2500 rpm. The Gehl CTL60 is equipped with a two-speed hydro
transmission, radial-lift loader boom, undercarriage with four steel rollers,
and 12.6" (320 mm) rubber tracks. The hydraulic system has a pump with fluid
flow rate of 18 gpm (68.2 lpm). The hydraulic pressure is 3000 psi (207 bar).
The track loader has a rated operating capacity of 1620 lbs (735 kg) and tipping
load of 4630 lbs (2100 kg). The lift height is 119.3" (3030 mm) to hinge pin,
and dump height is 93.4" (2370 mm).
| Engine Specs |
Engine Model ...................... Yanmar 4TNV98
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 202.5 (3.32)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 67.0 (49.3)
Rated Engine Speed, rpm ...................... 2500
High Idle Speed, rpm ...................... 2750
Maximum Torque, Nm (lb-ft) ...................... 233 (172)
Torque Speed, rpm ...................... 1625
Compression Ratio ...................... 18.5:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with trochoid pump
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 19.8 (75.0)
Engine Oil Capacity, qts (L) ...................... 10.8 (10.2)
Cooling System Capacity, qts (L) ...................... 11.5 (10.9)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 40
| Drive Train |
Drive System Type ...................... Hydrostatic, rubber track drive
Number of Gears ...................... 2 (low/high)
Drive Motor Type ...................... Axial-piston
Brakes Type ...................... Wet multi disc
Reduction Gearbox Capacity, qts (L) ...................... 1.2 (1.1)
Forward Speed (Low range), mph (kph) ...................... 4.6 (7.3)
Forward Speed (High range), mph (kph) ...................... 6.5 (10.4)
Reverse Speed (Low range), mph (kph) ...................... 4.6 (7.3)
Reverse Speed (High range), mph (kph) ...................... 6.5 (10.4)
| Undercarriage |
Tracks Type ...................... Rubber and steel reinforcement
Track Width, in (mm) ...................... 12.6 (320)
Ground Pressure, Bar (psi) ...................... 0.331 (4.8)
Track Rollers Type ...................... Steel rollers
Number of Rollers on Each Side ...................... 4
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Tandem, gear pump
Pump Flow, gpm (Lpm) ...................... 18.0 (68.2)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Tank Capacity, gal (L) ...................... 10.2 (39.0)
Hydraulic System Capacity, gal (L) ...................... 15.9 (60.3)
| Loader Performance |
Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 1620 (735)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 2315 (1050)
Tipping Load, lbs (kg) ...................... 4630 (2100)
Bucket Breakout Force, lbs (kg) ...................... 6730 (3055)
Lift Arm Breakout Force, lbs (kg) ...................... 6710 (3045)
Loader Boom Type .................... Radial-lift
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 107.8 (2740)
Length (Bucket On Ground), in (mm) ...................... 135.1 (3430)
Length (Ground Contact), in (mm) ...................... 54.7 (1390)
Height (Boom Raised), in (mm) ...................... 153.8 (3905)
Height (Operator Cab), in (mm) ...................... 83.9 (2130)
Width (w/o Bucket), in (mm) ...................... 62.2 (1580)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119.3 (3030)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 93.4 (2370)
Dump Reach At Max Height, in (mm) ...................... 28.8 (730)
Rollback Angle At Ground Level, deg ...................... 30
Departure Angle, deg ...................... 30
Bucket Width, in (mm) ...................... 66 (1675)
Ground Clearance, in (mm) ...................... 12.1 (310)
Turning Radius (w/Bucket), in (mm) ...................... 82 (2080)
Operating Weight, lbs (kg) ...................... 7330 (3325)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |