____________________________________________________________________________________
| Home / Compact Track Loaders / Bobcat Compact Track Loaders / Bobcat T62 |
Bobcat T62 Specifications
The
Bobcat T62 compact track loader is powered by 146.5 cu.in (2.4L) Bobcat Doosan
D24 four-cylinder turbocharged diesel engine with a rated power of 68 hp (50.7
kW) at 2600 rpm. The Bobcat T62 is equipped with a single-speed or two-speed
hydrostatic transmission, vertical-lift loader boom, solid-mounted or torsion suspension
undercarriage, and rubber tracks. The hydraulic system has a pump with fluid
flow rate of 17.6 gpm (66.5 lpm). The hydraulic pressure is 3500 psi (241 bar).
The loader has a rated operating capacity of 2150 lbs (953 kg) and tipping load
of 6143 lbs (2786 kg). The lift height is 114.5" (2910 mm) to hinge pin, and
dump height is 94.3" (2395 mm).
| Engine Specs |
Engine Model ...................... Bobcat Doosan D24
Engine Type ...................... Vertical four-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... 4
Displacement, cu.in (L) ...................... 146.5 (2.39)
Cylinder Bore, in (mm) ...................... 3.54 (90.0)
Piston Stroke, in (mm) ...................... 3.70 (94.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 68.0 (50.7)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 252 (186)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... High-pressure common rail
Injection Pump ...................... Delphi DFP 4.4
Fuel Filter Type ...................... Full flow, cartridge
Lubricating System ...................... Pressure lubrication by gear pump
Oil Filter Type ...................... Full flow, cartridge
Fuel Tank Capacity, gal (L) ...................... 28.3 (107.1)
Oil Capacity, qts (L) ...................... 9.7 (9.2)
Coolant Capacity, qts (L) ...................... 12.0 (11.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90
| Drive Train |
Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.53 (0.50)
Travel Speed (Single), mph (km/h) ...................... 7.2 (11.6)
Travel Speed (Low Range), mph (km/h) ...................... 7.2 (11.6)
Travel Speed (High Range), mph (km/h) ...................... 10.2 (16.4)
| Undercarriage |
Undercarriage Type (Std) ...................... Solid-Mounted
Undercarriage Type (Opt) ...................... Torsion Suspension
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 12.6 (320)
Track Width (Opt), in (mm) ...................... 15.7 (400)
Ground Pressure (12.6" Tracks, Solid-Mounted), psi (Bar) ...................... 5.6 (0.386)
Ground Pressure (15.7" Tracks, Solid-Mounted), psi (Bar) ...................... 4.7 (0.324)
Ground Pressure (12.6" Tracks, Torsion Suspension), psi (Bar) ...................... 5.9 (0.407)
Ground Pressure (15.7" Tracks, Torsion Suspension), psi (Bar) ...................... 5.0 (0.345)
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 17.6 (66.5)
Pump Capacity (High Flow), gpm (Lpm) ...................... 26.9 (101.8)
System Pressure, psi (Bar) ...................... 3500 (241)
Hydraulic Reservoir Capacity, gal (L) ...................... 5.0 (18.9)
Hydraulic System Capacity, gal (L) ...................... 9.5 (36.0)
Number of Valves ...................... 3
| Loader Performance |
Rated Operating Capacity (Solid-Mounted Undercarriage), lbs (kg) ...................... 2150 (953)
Rated Operating Capacity (Torsion Suspension Undercarriage), lbs (kg) ...................... 2050 (907)
Tipping Load (Solid-Mounted Undercarriage), lbs (kg) ...................... 6143 (2786)
Tipping Load (Torsion Suspension Undercarriage), lbs (kg) ...................... 5857 (2657)
Boom Lifting Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 4053 (1838)
Boom Lifting Force (Torsion Suspension Undercarriage), lbs (kg) ...................... 4139 (1877)
Bucket Breakout Force (Solid-Mounted Undercarriage), lbs (kg) ...................... 5300 (2402)
Bucket Breakout Force (Torsion Suspension Undercarriage), lbs (kg) ...................... 5145 (2334)
Loader Boom Type ...................... Radial-lift
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 107 (2720)
Length (Bucket On Ground), in (mm) ...................... 134.9 (3425)
Length (Ground Contact), in (mm) ...................... 54.3 (1380)
Width (12.6" Tracks, w/o Bucket), in (mm) ...................... 67 (1700)
Width (15.7" Tracks, w/o Bucket), in (mm) ...................... 70.2 (1780)
Operating Height, in (mm) ...................... 148.5 (3770)
Height (Operator Cab), in (mm) ...................... 80.5 (2045)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 114.5 (2910)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 94.3 (2395)
Dump Reach At Max Height, in (mm) ...................... 36.7 (935)
Rollback Angle At Ground Level, deg ...................... 31
Rollback Angle At Max Height, deg ...................... 90
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 8.3 (210)
Turning Radius (w/Bucket), in (mm) ...................... 81.6 (2075)
Operating Weight (Solid-Mounted Undercarriage), lbs (kg) ...................... 8610 (3905)
Operating Weight (Torsion Suspension Undercarriage), lbs (kg) ...................... 9070 (4115)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |