____________________________________________________________________________________
| Home / Compact Track Loaders / Bobcat Compact Track Loaders / Bobcat T595 |
Bobcat T595 Specifications
The
Bobcat T595 compact track loader is powered by 146.5 cu.in (2.4L) Bobcat Doosan
D24 4-cylinder direct injection turbocharged diesel engine with a rated power of
74 hp (55.2 kW). The Bobcat T595 is equipped with one-speed or
two-speed transmission, vertical-lift loader boom, solid-mounted undercarriage
with triple flange rollers, and rubber tracks. The hydraulic system has a pump
with fluid flow rate of 17.1 gpm (64.7 lpm). The hydraulic pressure is 3550 psi
(245 bar). The loader has a rated operating capacity of 2200 lbs (998 kg)
and tipping load of 6285 lbs (2850 kg). The lift height is 119" (3020 mm) to
hinge pin, and dump height is 91.3" (2320 mm).
| Engine Specs |
Engine Model ...................... Bobcat Doosan D24
Engine Type ...................... Vertical four-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... 4
Displacement, cu.in (L) ...................... 146.5 (2.39)
Cylinder Bore, in (mm) ...................... 3.54 (90.0)
Piston Stroke, in (mm) ...................... 3.70 (94.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 74.0 (55.2)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 280 (207)
Torque Speed, rpm ...................... 1800
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... High-pressure common rail
Injection Pump ...................... Delphi DFP 4.4
Fuel Filter Type ...................... Full flow, cartridge
Lubricating System ...................... Pressure lubrication by gear pump
Oil Filter Type ...................... Full flow, cartridge
Fuel Tank Capacity, gal (L) ...................... 36.5 (138.2)
Oil Capacity, qts (L) ...................... 9.2 (8.7)
Coolant Capacity, qts (L) ...................... 11.3 (10.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90
| Drive Train |
Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low-high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.39 (0.37)
Travel Speed (Single), mph (km/h) ...................... 7.1 (11.4)
Travel Speed (Low Range), mph (km/h) ...................... 7.1 (11.4)
Travel Speed (High Range), mph (km/h) ...................... 10.4 (16.7)
| Undercarriage |
Undercarriage Type ...................... Solid-mounted
Tracks Type ...................... Rubber tracks
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 12.6 (320)
Track Width (Opt), in (mm) ...................... 15.7 (400)
Ground Pressure (12.6" Tracks), psi (Bar) ...................... 5.1 (0.352)
Ground Pressure (15.7" Tracks), psi (Bar) ...................... 4.1 (0.283)
Number of Rollers (per Side) ...................... 4, Triple flange rollers
| Hydraulic System |
Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 17.1 (64.7)
Pump Capacity (High Flow), gpm (Lpm) ...................... 26.7 (101.1)
System Pressure, psi (Bar) ...................... 3550 (245)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Hydraulic Reservoir Capacity, gal (L) ...................... 2.0 (7.6)
Hydraulic System Capacity, gal (L) ...................... 9.5 (36.0)
| Loader Performance |
Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 2200 (998)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 3142 (1425)
Tipping Load, lbs (kg) ...................... 6285 (2850)
Loader Boom Type ...................... Vertical-lift
| Dimensions and Weight |
Length (w/o Bucket), in (mm) ...................... 104.6 (2655)
Length (Bucket On Ground), in (mm) ...................... 133 (3375)
Length (Ground Contact), in (mm) ...................... 55.2 (1400)
Width (w/o Bucket), in (mm) ...................... 67 (1700)
Operating Height, in (mm) ...................... 153.6 (3900)
Height (Operator Cab), in (mm) ...................... 77.8 (1970)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 119 (3020)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 91.3 (2320)
Dump Reach At Max Height, in (mm) ...................... 34.9 (885)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 29
Bucket Width, in (mm) ...................... 68 (1725)
Ground Clearance, in (mm) ...................... 7.4 (190)
Turning Radius (w/Bucket), in (mm) ...................... 80 (2030)
Shipping Weight, lbs (kg) ...................... 7450 (3380)
Operating Weight, lbs (kg) ...................... 8055 (3655)
____________________________________________________________________________________
____________________________________________________________________________________
| COMPACT TRACK LOADERS SPECIFICATIONS |