____________________________________________________________________________________

Home / Compact Track Loaders / Bobcat Compact Track Loaders / Bobcat T250

Bobcat T250 Specifications

The Bobcat T250 compact track loader is powered by 203.2 cu.in (3.3L) Kubota V3300-DI-T 4-cylinder direct injection turbocharged diesel engine with a rated power of 78.3 hp (58 kW). The Bobcat T250 is equipped with a single-speed hydrostatic transmission, hydraulic disc brakes, and rubber tracks with steel inserts. The hydraulic system has a pump with fluid flow rate of 21.2 gpm (80.3 lpm). The hydraulic pressure is 3300 psi (227.5 bar). The compact track loader has a rated operating capacity of 2640 lbs (1200 kg) and tipping load of 7540 lbs (3428 kg). The boom lifting force is 5500 lbs (2500 kg), and bucket breakout force is 5530 lbs (2513 kg).

Engine Specs

Engine Model ...................... Kubota V3300-DI-T
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 203.2 (3.31)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 78.3 (58.0)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 287 (212.6)
Torque Speed, rpm ...................... 1600
Idle Speed, rpm ...................... 1250-2650
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) ...................... 30.0 (113.6)
Oil Capacity, qts (L) ...................... 14.0 (13.2)
Coolant Capacity, qts (L) ...................... 17.2 (16.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.11 (0.10)
Forward Speed, mph (kph) ...................... 6.3 (10.1)
Reverse Speed, mph (kph) ...................... 6.3 (10.1)

Undercarriage

Tracks Type ...................... Rubber with steel inserts
Track Width, in (mm) ...................... 17.7 (450)
Track Rollers (per Side) ...................... 3 triple-flanged rollers
Track Idlers (per Side) ...................... Front and rear idlers

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 21.2 (80.3)
Pump Flow (Opt), gpm (Lpm) ...................... 39.9 (151.4)
System Pressure, Bar (psi) ...................... 227.5 (3300)
Hydraulic Reservoir Capacity, qts (L) ...................... 18.9 (17.8)
Hydraulic System Capacity, gal (L) ...................... 13.0 (49.2)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2640 (1200)
Tipping Load, lbs (kg) ...................... 7540 (3428)
Boom Lifting Force, lbs (kg) ...................... 5500 (2500)
Bucket Breakout Force, lbs (kg) ...................... 5530 (2513)

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 114.9 (2915)
Length (Bucket On Ground), in (mm) ...................... 142.9 (3630)
Length (Ground Contact), in (mm) ...................... 63.7 (1615)
Width (w/o Bucket), in (mm) ...................... 78 (1980)
Operating Height, in (mm) ...................... 156.6 (3975)
Height (Operator Cab), in (mm) ...................... 80.9 (2055)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 122.4 (3110)
Dump Angle At Max Height, deg ...................... 41
Dump Height (Fully Raised), in (mm) ...................... 95.4 (2420)
Dump Reach At Max Height, in (mm) ...................... 23.8 (605)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 97
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 80 (2030)
Ground Clearance, in (mm) ...................... 8.7 (220)
Turning Radius (w/Bucket), in (mm) ...................... 82.4 (2090)
Shipping Weight, lbs (kg) ...................... 8415 (3825)
Operating Weight, lbs (kg) ...................... 9205 (4185)

____________________________________________________________________________________

____________________________________________________________________________________

COMPACT TRACK LOADERS SPECIFICATIONS