• All Manufacturers

  • Bobcat
  • Case
  • Caterpillar
  • Doosan
  • John Deere
  • Kubota

  Wheel Loaders

  • Bobcat L28
  • Cat 926M
  • Case 221D
  • John Deere 304H
  • Doosan DL280-7
  • Case 521E
  • Kubota R070
  • John Deere 624J

Caterpillar 914G Specifications

The Caterpillar 914G compact wheel loader is powered by Caterpillar 3054T vertical 4-cylinder turbocharged diesel engine with a rated power of 90 hp (67 kW) at 2200 rpm. The Cat 914G is equipped with a 2-range hydrostatic transmission, power steering system, hydraulic wet disc brakes, and 17.5x25 standard tires. The hydraulic system has a pump with fluid flow rate of 24 gpm (90 lpm). The hydraulic pressure is 3550 psi (245 bar). The wheel loader has a rated operating capacity of 5840 lbs (2650 kg) and tipping load of 11680 lbs (5300 kg). The maximum lift height is 135.2" (3435 mm) to hinge pin, and bucket breakout force is 13135 lbs (5970 kg).

Engine Model .................... Caterpillar 3054T
Engine Type .................... 4-Cycle vertical liquid-cooled diesel
Number of Cylinders .................... 4, in-line
Displacement, cu.in (L) .................... 243 (4.0)
Cylinder Bore, in (mm) .................... 3.94 (100.0)
Piston Stroke, in (mm) .................... 5.00 (127.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, Hp (kW) .................... 90.0 (67.0)
Rated Engine Speed, rpm .................... 2200
Maximum Torque, Nm (ft-lb) .................... 354 (257)
Torque Speed, rpm .................... 1400
Firing Order .................... 1-3-4-2
Fuel System .................... Direct injection
Air Cleaner Type .................... Dry dual element
Lubrication System .................... Full pressure
Cooling System .................... Liquid-cooled
Emission Level .................... Tier 4 Final
Fuel Tank Capacity, gal (L) .................... 39.6 (150.0)
Oil Capacity, qts (L) .................... 7.4 (7.0)
Coolant Capacity, qts (L) .................... 23.1 (22.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 60

Transmission Type .................... Hydrostatic, two-range
Number of Forward Gears .................... 2
Number of Reverse Gears .................... 2
Forward Speed (Low Range), mph (kph) .................... 5.6 (9.0)
Reverse Speed (Low Range), mph (kph) .................... 5.6 (9.0)
Forward Speed (High Range), mph (kph) .................... 21.7 (35.0)
Reverse Speed (High Range), mph (kph) .................... 21.7 (35.0)

Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Hydrostatic power
Service Brakes Type .................... Hydraulic wet disc
Front Tire Size (Std) .................... 17.5x25
Rear Tire Size (Std) .................... 17.5x25
Front Tire Size (Opt) .................... 15.5x25
Rear Tire Size (Opt) .................... 15.5x25

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Fixed displacement, gear
Pump Flow, gpm (Lpm) .................... 24.0 (90.0)
System Pressure, psi (Bar) .................... 3550 (245)
Hydraulic Tank Capacity, gal (L) .................... 18.5 (70.0)
Hydraulic System Capacity, gal (L) .................... 26.4 (100.0)

Rated Operating Capacity (Straight), lbs (kg) .................... 6690 (3035)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 5840 (2650)
Tipping Load (Straight), lbs (kg) .................... 13380 (6070)
Tipping Load (Full Turn), lbs (kg) .................... 11680 (5300)
Breakout Force, lbs (kg) .................... 13135 (5970)

Maximum Working Height, in (mm) .................... 174.8 (4440)
Maximum Lift Height To Hinge Pin, in (mm) .................... 135.2 (3435)
Height To Top Of Cab, in (mm) .................... 122 (3100)
Length With Bucket On Ground, in (mm) .................... 247.2 (6280)
Width (Tread Center), in (mm) .................... 70.8 (1800)
Width (Over Tires), in (mm) .................... 89 (2260)
Wheel Base, in (mm) .................... 102.4 (2600)
Ground Clearance, in (mm) .................... 17.9 (455)
Departure Angle, deg .................... 30
Articulation Angle, deg .................... 40
Bucket Width, in (mm) .................... 95 (2405)
Bucket Capacity, cu.ft (m3) .................... 49.4 (1.40)
Digging Depth, in (mm) .................... 3.5 (89)
Rollback Angle At Full Height, deg .................... 60
Dump Angle At Full Height, deg .................... 48
Clearance With Bucket Dumped, in (mm) .................... 103.3 (2625)
Reach At Full Height, in (mm) .................... 39.8 (1010)
Turning Circle (w/Bucket), in (m) .................... 408.3 (10.4)
Operating Weight, lbs (kg) .................... 16295 (7390)

____________________________________________________________________________________

Wheel Loaders, Skid Steers, and Compact Track Loaders