• All Manufacturers

  • Bobcat
  • Case
  • Caterpillar
  • Doosan
  • John Deere
  • Kubota

  Wheel Loaders

  • Bobcat L28
  • Cat 926M
  • Case 221D
  • John Deere 304H
  • Doosan DL280-7
  • Case 521E
  • Kubota R070
  • John Deere 624J

Bobcat AL350 Specifications

The Bobcat AL350 articulated wheel loader driveline system components: a 203.2 cu.in (3.3L) Kubota V3300-DI 4-cylinder liquid-cooled diesel engine with a rated power of 60.5 hp (45.1 kW), and two-range hydrostatic transmission. The hydraulic system has a gear pump with a rated capacity of 16.9 gal/min (64 l/min). The system relief pressure is 3625 psi (250 bar). The Bobcat AL350 is equipped with a power steering system, hydraulic drum brakes, and 375/75R20 tires. The wheel loader has a max lift height of 126" (3200 mm) and breakout force of 10760 lbs (4890 kg). The rated operating capacity is 3465 lbs (1575 kg), and tipping load is 6930 lbs (3150 kg).

Engine Model .................... Kubota V3300-DI
Engine Type .................... Vertical liquid-cooled 4-cylinder diesel
Number of Cylinders .................... Four
Displacement, cu.in (L) .................... 203.2 (3.31)
Cylinder Bore, in (mm) .................... 3.86 (98.0)
Piston Stroke, in (mm) .................... 4.33 (110.0)
Aspiration Type .................... Naturally aspirated
Rated Engine Power, hp (kW) .................... 60.5 (45.1)
Rated Engine Speed, rpm .................... 2200
Maximum Torque, Nm (lb-ft) .................... 221 (163.7)
Torque Speed, rpm .................... 1400
Idle Speed, rpm .................... 1250-2650
Compression Ratio .................... 22.6:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct injection
Lubricating System .................... Pressure lubrication by gear pump
Cooling System .................... Forced circulation with water pump
Emission Level .................... Tier 3 Final
Fuel Tank Capacity, gal (L) .................... 19.8 (75.0)
Oil Capacity, qts (L) .................... 14.0 (13.2)
Coolant Capacity, qts (L) .................... 17.2 (16.3)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 90

Transmission Type .................... Hydrostatic
Number of Forward Gears .................... 2
Number of Reverse Gears .................... 2
Forward Speed (Std), mph (kph) .................... 12.5 (20.0)
Reverse Speed (Std), mph (kph) .................... 12.5 (20.0)
Forward Speed (Hi-Speed), mph (kph) .................... 22.5 (36.0)
Reverse Speed (Hi-Speed), mph (kph) .................... 22.5 (36.0)

Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Hydrostatic power
Brakes Type .................... Hydraulic drum
Front Tire Size (Std) .................... 375/75R20
Rear Tire Size (Std) .................... 375/75R20
Front Tire Size (Opt) .................... 12.5x20
Rear Tire Size (Opt) .................... 12.5x20

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Capacity, gpm (Lpm) .................... 16.9 (64.0)
System Pressure, psi (Bar) .................... 3625 (250)
Hydraulic Reservoir Capacity, gal (L) .................... 12.1 (46.0)
Hydraulic System Capacity, gal (L) .................... 14.5 (55.0)
Number of Control Valves .................... 3

Rated Operating Capacity (Straight), lbs (kg) .................... 3850 (1750)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 3465 (1575)
Tipping Load (Straight), lbs (kg) .................... 7700 (3500)
Tipping Load (Full Turn), lbs (kg) .................... 6930 (3150)
Lift Capacity, lbs (kg) .................... 10100 (4590)
Breakout Force, lbs (kg) .................... 10760 (4890)

Maximum Lift Height (Bucket Hinge Pin), in (mm) .................... 126 (3200)
Maximum Lift Height (Forks), in (mm) .................... 118.9 (3020)
Height To Top Of Cab, in (mm) .................... 105.1 (2670)
Length With Bucket On Ground, in (mm) .................... 195.1 (4955)
Length With Forks On Ground, in (mm) .................... 218.1 (5540)
Width (Tread Center), in (mm) .................... 54.4 (1380)
Width (Over Tires), in (mm) .................... 70.1 (1780)
Wheel Base, in (mm) .................... 82.6 (2100)
Ground Clearance, in (mm) .................... 17.1 (435)
Departure Angle, deg .................... 40
Articulation Angle, deg .................... 40
Working Width (Bucket), in (mm) .................... 73 (1850)
Heaped Capacity (Bucket), cu.ft (m3) .................... 28.2 (0.80)
Digging Depth (Bucket), in (mm) .................... 3.9 (100)
Rollback Angle At Ground (Bucket), deg .................... 50
Dump Angle At Full Height (Bucket), deg .................... 45
Dumping Height (Bucket), in (mm) .................... 100.4 (2550)
Reach At Full Height (Bucket Dumped), in (mm) .................... 27.5 (700)
Working Length (Forks), in (mm) .................... 35.4 (900)
Digging Depth (Forks), in (mm) .................... 5.3 (135)
Clearance At Max Reach (Forks), in (mm) .................... 53.1 (1350)
Maximum Reach (Forks), in (mm) .................... 49.2 (1250)
Reach At Full Height (Forks), in (mm) .................... 16.9 (430)
Reach At Ground Level (Forks), in (mm) .................... 24.8 (630)
Turning Radius (w/Bucket), in (mm) .................... 162.8 (4135)
Turning Radius (Inside Tires), in (mm) .................... 74 (1880)
Operating Weight, lbs (kg) .................... 10560 (4800)

____________________________________________________________________________________

Wheel Loaders, Skid Steers, and Compact Track Loaders