Home / Wheel Loaders / Case Wheel Loaders / Case 321F

Case 321F Specifications

The Case 321F compact wheel loader driveline system components: FPT F5H FL463 4-cylinder turbocharged liquid-cooled diesel engine with a rated power of 70 hp (52 kW), and hydrostatic transmission. The hydraulic system has a gear pump with a rated capacity of 22.5 gal/min (85 l/min). The system relief pressure is 3335 psi (230 bar). The Case 321F is equipped with a power steering system, hydraulic wet disc brakes, and 365/80R20 standard tires. The wheel loader has a maximum lift height of 133.7" (3395 mm) and breakout force of 10076 lbs (4570 kg). The rated operating capacity is 4095 lbs (1860 kg), and tipping load is 8190 lbs (3720 kg).

Engine Specs

Engine Model .................... FPT F5H FL463 A-F001
Engine Type .................... 4-cycle liquid-cooled diesel
Number of Cylinders .................... 4
Displacement, cu.in (L) .................... 207 (3.39)
Cylinder Bore, in (mm) .................... 3.89 (99.0)
Piston Stroke, in (mm) .................... 4.33 (110.0)
Aspiration Type .................... Turbocharged
Rated Engine Power, hp (kW) .................... 70.0 (52.0)
Rated Engine Speed, rpm .................... 2500
Maximum Torque, Nm (lb-ft) .................... 308 (227)
Torque Speed, rpm .................... 1400
Fast Idle Speed, rpm .................... 2500
Low Idle Speed, rpm .................... 950
Compression Ratio .................... 17:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct injection
Fuel Injection .................... High pressure common rail
Cooling System .................... Liquid-cooled
Water Pump Type .................... Centrifugal
Oil Pump Type .................... Rotor
Emission Level .................... Tier 4 Final
Fuel Tank Capacity, gal (L) .................... 22.7 (86.0)
Oil Capacity, qts (L) .................... 7.4 (7.0)
Coolant Capacity, qts (L) .................... 13.6 (13.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 120

Transmission

Transmission Type .................... Hydrostatic
Number of Gears (Std) .................... 2
Number of Gears (Opt) .................... 3
Maximum Forward Speed (Std), mph (kph) .................... 12.4 (20.0)
Maximum Forward Speed (Opt), mph (kph) .................... 20.6 (33.1)
Maximum Reverse Speed (Std), mph (kph) .................... 12.4 (20.0)
Maximum Reverse Speed (Opt), mph (kph) .................... 20.6 (33.1)

Wheels and Tires

Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Hydrostatic power
Service Brakes Type .................... Hydraulic wet disc
Front Tire Size (Std) .................... 365/80R20
Rear Tire Size (Std) .................... 365/80R20
Front Tire Size (Opt) .................... 405/70R20
Rear Tire Size (Opt) .................... 405/70R20

Hydraulic System

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Capacity, gpm (Lpm) .................... 22.5 (85.0)
System Pressure, psi (Bar) .................... 3335 (230)
Hydraulic Reservoir Capacity, gal (L) .................... 10.6 (40.0)
Hydraulic System Capacity, gal (L) .................... 14.0 (53.0)

Loader Performance

Rated Operating Capacity (Straight), lbs (kg) .................... 4870 (2210)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 4095 (1860)
Tipping Load (Straight), lbs (kg) .................... 9740 (4420)
Tipping Load (Full Turn), lbs (kg) .................... 8190 (3720)
Lift Capacity, lbs (kg) .................... 8345 (3785)
Breakout Force, lbs (kg) .................... 10076 (4570)

Dimensions and Weight

Maximum Operating Height .................... 176 (4470)
Maximum Lift Height To Hinge Pin, in (mm) .................... 133.7 (3395)
Height To Top Of Cab, in (mm) .................... 105.5 (2680)
Length With Bucket On Ground, in (mm) .................... 234.3 (5950)
Width (Tread Center), in (mm) .................... 59.1 (1500)
Width (Over Tires), in (mm) .................... 73.2 (1860)
Wheel Base, in (mm) .................... 87.6 (2225)
Ground Clearance, in (mm) .................... 14.6 (370)
Departure Angle, deg .................... 32
Articulation Angle, deg .................... 40
Bucket Width, in (mm) .................... 82 (2080)
Bucket Capacity, cu.ft (m3) .................... 35.3 (1.00)
Digging Depth, in (mm) .................... 3.3 (84)
Rollback Angle At Ground, deg .................... 37
Rollback Angle At Full Height, deg .................... 53
Dump Angle At Full Height, deg .................... 45
Clearance With Bucket Dumped, in (mm) .................... 98.1 (2495)
Reach At Full Height, in (mm) .................... 39.5 (1005)
Turning Radius (w/Bucket), in (mm) .................... 157 (3985)
Operating Weight, lbs (kg) .................... 13300 (6035)

____________________________________________________________________________________

WHEEL LOADERS SPECIFICATIONS

Caterpillar