Home / Wheel Loaders / John Deere Wheel Loaders / John Deere 204K

John Deere 204K Specifications

The John Deere 204K wheel loader is powered by 202.5 cu.in (3.3L) Yanmar 4TNV98 vertical 4-cylinder naturally aspirated liquid-cooled diesel engine with a rated power of 59 hp (44 kW) at 2500 rpm. The John Deere 204K is equipped with a two-range hydrostatic transmission, power steering system, hydraulic wet disc brakes, and 365/70R18 standard tires. The hydraulic system has a pump with fluid flow rate of 18 gpm (68.2 lpm). The wheel loader has a rated operating capacity of 3615 lbs (1640 kg) and tipping load of 7230 lbs (3280 kg). The maximum lift height is 125.2" (3180 mm) to hinge pin, and bucket breakout force is 9190 lbs (4170 kg).

Engine Specs

Engine Model .................... Yanmar 4TNV98
Engine Type .................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders .................... Four
Displacement, cu.in (L) .................... 202.5 (3.32)
Cylinder Bore, in (mm) .................... 3.86 (98.0)
Piston Stroke, in (mm) .................... 4.33 (110.0)
Aspiration Type .................... Naturally aspirated
Rated Engine Power, hp (kW) .................... 59.0 (44.0)
Rated Engine Speed, rpm .................... 2500
High Idle Speed, rpm .................... 2750
Maximum Torque, Nm (lb-ft) .................... 239 (176)
Torque Speed, rpm .................... 1600
Compression Ratio .................... 18.5:1
Firing Order .................... 1-3-4-2
Fuel System .................... Direct injection
Fuel Filter Type .................... Replaceable element
Lubrication System .................... Forced with trochoid pump
Cooling System .................... Liquid-cooled with radiator
Air Cleaner Type .................... Dry dual element
Emission Level .................... Interim Tier 4
Fuel Tank Capacity, gal (L) .................... 13.2 (50.0)
Engine Oil Capacity, qts (L) .................... 10.5 (10.0)
Cooling System Capacity, qts (L) .................... 12.6 (12.0)
Electrical System Rating, Volts .................... 12
Charging System .................... Alternator
Alternator Rating, Amps .................... 80

Transmission

Transmission Type .................... Hydrostatic, 2-range
Number of Forward Gears .................... 2
Number of Reverse Gears .................... 2
Forward Speed (Low Range), mph (kph) .................... 3.7 (6.0)
Forward Speed (High Range), mph (kph) .................... 12.4 (20.0)
Reverse Speed (Low Range), mph (kph) .................... 3.7 (6.0)
Reverse Speed (High Range), mph (kph) .................... 12.4 (20.0)

Wheels and Tires

Drive System Type .................... Four-wheel drive (4WD)
Steering Configuration .................... Articulated frame
Steering System .................... Hydrostatic power
Service Brakes Type .................... Hydraulic wet disc
Front Tire Size (Std) .................... 365/70R18
Rear Tire Size (Std) .................... 365/70R18
Front Tire Size (Opt) .................... 400/70R20
Rear Tire Size (Opt) .................... 400/70R20
Front Tire Size (Opt) .................... 405/70R18
Rear Tire Size (Opt) .................... 405/70R18

Hydraulic System

Hydraulic System Type .................... Open center
Hydraulic Pump Type .................... Gear
Pump Flow, gpm (Lpm) .................... 18.0 (68.2)
System Pressure, psi (Bar) .................... 3335 (230)
Hydraulic System Capacity, gal (L) .................... 23.8 (90.0)
Number of Valves .................... 3

Loader Performance

Rated Operating Capacity (Straight), lbs (kg) .................... 4080 (1850)
Rated Operating Capacity (Full Turn), lbs (kg) .................... 3615 (1640)
Tipping Load (Straight), lbs (kg) .................... 8160 (3700)
Tipping Load (Full Turn), lbs (kg) .................... 7230 (3280)
Lift Capacity, lbs (kg) .................... 8160 (3700)
Breakout Force, lbs (kg) .................... 9190 (4170)

Dimensions and Weight

Maximum Lift Height To Hinge Pin, in (mm) .................... 125.2 (3180)
Height To Top Of Cab, in (mm) .................... 96.5 (2450)
Length With Bucket On Ground, in (mm) .................... 213.4 (5420)
Width (Tread Center), in (mm) .................... 54.9 (1395)
Width (Over Tires), in (mm) .................... 69.3 (1760)
Wheel Base, in (mm) .................... 84.6 (2150)
Ground Clearance, in (mm) .................... 12.6 (320)
Articulation Angle, deg .................... 40
Bucket Width, in (mm) .................... 75 (1905)
Bucket Capacity, cu.ft (m3) .................... 28.2 (0.80)
Digging Depth, in (mm) .................... 2.8 (70)
Rollback Angle At Full Height, deg .................... 65
Rollback Angle At Ground, deg .................... 37
Dump Angle At Full Height, deg .................... 40
Clearance With Bucket Dumped, in (mm) .................... 95.7 (2430)
Reach At Full Height, in (mm) .................... 36.2 (920)
Turning Radius (w/Bucket), in (mm) .................... 166.5 (4230)
Operating Weight, lbs (kg) .................... 11805 (5355)

____________________________________________________________________________________

WHEEL LOADERS SPECIFICATIONS

Caterpillar